1
Download Datum® Appendix B Remote Control Commands
Transcript
Datum Systems, Inc. PSM-500 Modem Remote Control Protocol Unit Monitor, Command [07h] Read Change Flags Byte 0 Byte 1 Byte 2 Byte 3 Bit 0 Mode Spare Spare Spare Bit 1 Full Spare Spare Spare Bit 2 Zero Spare Spare Spare Byte 4 Byte 5 Bit 0 Mode0 Spare Bit 1 Mode1 Spare Bit 3 Spare Spare Spare Spare Bit 4 Spare Spare Spare Spare Bit 5 Spare Spare Spare Spare Bit 6 Spare Spare Spare Spare Bit 7 Spare Spare Spare Spare Bit 5 Spare Spare Bit 6 Spare Spare Bit 7 Spare Spare Bit 5 0 0 0 0 Bit 6 0 0 0 0 Bit 7 0 0 0 0 Bit 5 Spare Spare Bit 6 Spare Spare Bit 7 Spare Spare Unit Monitor, Read Flags Bit 2 Spare Spare Bit 3 Spare Spare Bit 4 Spare Spare Unit Monitor, Read Bytes Bytes 6-7 Bytes 8-9 Full Scale Voltage, Signed 16b, (-100 to +100), 100mV Increments Zero Scale Voltage, Signed 16b, (-100 to +100), 100mV Increments Byte 0 Byte 1 Byte 2 Byte 3 Bit 0 Mode 0 0 0 Byte 4 Byte 5 Bit 0 Mode0 Spare Unit Monitor, Write Enable Flags Bit 1 Bit 2 Bit 3 Bit 4 Full Zero 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Unit Monitor, Write Flags Bit 1 Mode1 Spare Bit 2 Spare Spare Bit 3 Spare Spare Bit 4 Spare Spare Unit Monitor, Write Bytes Bytes 6-7 Bytes 8-9 Full Scale Voltage, Signed 16b, (-100 to +100), 100mV Increments Zero Scale Voltage, Signed 16b, (-100 to +100), 100mV Increments [Mode1-Mode0] = Monitor Mode, 2b, 0=AGC Voltage, 1=Eb/No, 2=Mod CXR Level Rev 0.93 12/12/10 B-21
