1
Download Datum® Appendix B Remote Control Commands
Transcript
Datum Systems, Inc. PSM-500 Modem Remote Control Protocol Interface SDMS, Command [C4h] Used Only When SDMS Option is Installed Read Change Flags Byte 0 Byte 1 Byte 2 Byte 3 Bit 0 IPAddr Spare Spare Spare Bit 1 IPMask Spare Spare Spare Byte 4 Byte 5 Bit 0 Failed Spare Bit 1 Reset Spare Bit 2 MAC Spare Spare Spare Bit 3 Options Spare Spare Spare Bit 4 Version Spare Spare Spare Bit 5 SerialN Spare Spare Spare Bit 6 Spare Spare Spare Spare Bit 7 Spare Spare Spare Spare Bit 5 Spare Spare Bit 6 Spare Spare Bit 7 Spare Spare Bit 5 0 0 0 0 Bit 6 0 0 0 0 Bit 7 0 0 0 0 Bit 5 Spare Spare Bit 6 Spare Spare Bit 7 Spare Spare Interface SDMS, Read Flags Bit 2 Alarm Spare Bit 3 Spare Spare Bit 4 Spare Spare Interface SDMS, Read Bytes Bytes 6-9 Bytes 10-13 Bytes 14-19 Bytes 20-36 Bytes 37-53 Bytes 54-57 Bytes 58-65 IP Address, 32b Network Mask, 32b MAC Address, 48b SDMS Options String Terminated with a 00h SDMS Version String Terminated with a 00h SDMS Serial Number, 32b Spare Byte 0 Byte 1 Byte 2 Byte 3 Bit 0 IPAddr 0 0 0 Byte 4 Byte 5 Bit 0 x Spare Interface SDMS, Write Enable Flags Bit 1 Bit 2 Bit 3 Bit 4 IPMask 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Interface SDMS, Write Flags Bit 1 x Spare Bit 2 x Spare Bit 3 Spare Spare Bit 4 Spare Spare Interface SDMS, Write Bytes Bytes 6-9 Bytes 10-13 Bytes 14-19 Bytes 20-36 Bytes 37-53 Bytes 54-57 Bytes 58-65 Rev 0.93 12/12/10 IP Address, 32b Network Mask, 32b x x x x Spare B-51
