Download Siemens SITRANS P Operating instructions
Transcript
Table of contents 1 2 3 4 Introduction...................................................................................................................................................9 1.1 Purpose of this documentation......................................................................................................9 1.2 Product information.......................................................................................................................9 1.3 History...........................................................................................................................................9 1.4 Scope of the instructions.............................................................................................................10 1.5 Checking the consignment..........................................................................................................10 1.6 Transportation and storage.........................................................................................................11 1.7 Notes on warranty.......................................................................................................................11 Safety instructions......................................................................................................................................13 2.1 2.1.1 2.1.2 Precondition for use.....................................................................................................................13 Laws and directives.....................................................................................................................13 Conformity with European directives...........................................................................................13 2.2 Use in hazardous areas...............................................................................................................14 Description..................................................................................................................................................17 3.1 System configuration...................................................................................................................17 3.2 Application range.........................................................................................................................18 3.3 Structure......................................................................................................................................19 3.4 Nameplate layout.........................................................................................................................21 3.5 Measuring point label layout........................................................................................................22 3.6 3.6.1 3.6.2 3.6.3 3.6.3.1 3.6.3.2 3.6.3.3 3.6.3.4 3.6.3.5 3.6.3.6 3.6.3.7 Functional principle......................................................................................................................23 Overview of mode of operation....................................................................................................23 Operation of the electronics.........................................................................................................23 Measuring cell operation.............................................................................................................24 Measuring cell for gauge pressure..............................................................................................25 Measuring cell for differential pressure and flow rate..................................................................26 Measuring cell for level................................................................................................................27 Measuring cell for absolute pressure from the differential pressure series.................................28 Measuring cell for absolute pressure from the gauge pressure series........................................29 Measuring cell for gauge pressure, front-flush membrane..........................................................29 Measuring cell for absolute pressure, front-flush membrane......................................................30 3.7 Remote seal................................................................................................................................31 3.8 SIMATIC PDM.............................................................................................................................31 Installing/mounting......................................................................................................................................33 4.1 4.1.1 4.1.2 Basic safety instructions..............................................................................................................33 Installation location requirements................................................................................................37 Proper mounting..........................................................................................................................38 SITRANS P, DS III series with HART Operating Instructions, 09/2012, A5E00047092-08 3