Download Microcom 2150 Datasheet

The SDC2130/SDC1250 uses a conduction plate at the bottom of the board for heat extraction. For best results,
attach firmly with thermal compound paste against a metallic chassis so that heat transfers to the conduction
plate to the chassis. If no metallic surface is available, mount the controller on spacers so that forced or natural air
flow can go over the plate surface to remove heat.
Mechanical Specifications
TABLE 11.
Measure Point
Weight
Board
Power Wire Gauge
Terminal strip
Min
Typ
Max
100 (3.5)
Units
g (oz.)
12
AWG
0.64"
16.26mm
0.16"
4.1mm
0.75"
19mm
Parameter
2.76"
70mm
1.18"
30mm
1.54"
39.1mm
0.519"
13.2mm
2.45"
62.2mm
2.76"
70mm
1.645"
41.78mm
0.58"
14.73mm
FIGURE 15. SDC2130/SDC2150 front view and dimensions
2.45"
62.2mm
FIGURE 16. SDC2130/SDC2150 top view and dimensions
10
SDC2130/SDC2150 Motor Controller Datasheet
Version 1.2. May 5, 2011