Download Sharp PC-A290 Specifications

1.
Remove the floppy disk from the floppy disk drive.
2.
Turn off the computer.
3.
Disconnect the floppy disk drive unit by simultaneously pressing the buttons on
each side of the connector and pulling it out.
4.
Close the cover of the floppy disk drive port on the computer.
2
Handling Floppy Disks
•
•
•
•
Do not open the shutter and touch the disk inside; otherwise, you will not be able
to read or write data to the disk.
Do not place floppy disks near magnets or heat source, in direct sunlight or in a
dusty place, etc.
Never subject a disk to sudden shocks or extreme vibration. Do not drop, bend, or
place heavy objects on a disk.
Do not spill liquid onto a disk.
Inserting and Removing a Floppy Disk
Inserting
Hold the floppy disk with the arrow facing up and towards the drive. Slide the disk
into the drive until it locks into place.
2-8