1
Download Motorola RFS6000 - Wireless RF Switch User manual
Transcript
Global Configuration Commands user [snmpmanager| snmpoperator|snmptrap] 5-105 Defines a user who can access the SNMP engine. • snmpmanager v3– Manager user • v3 [auth|encrypted] – User using v3 security model • auth md5 <password> – Sets authentication parameters for the user. • md5 – Use HMAC MD5 algorithm for authentication • <password> – The password for the user • encrypted [auth|des] – Displays privacy parameters for the user • auth md5 <password>– Displays authentication parameters for the user • des – Use CBC-DES for privacy • snmpoperator v3 – Operator user • snmptrap v3 – Trap user Example RFSwitch(config)#snmp-server community TestCommunity ro RFSwitch(config)# RFSwitch(config)#snmp-server contact TestManager RFSwitch(config)# RFSwitch(config)#snmp-server enable traps all RFSwitch(config)# RFSwitch(config)#snmp-server enable traps miscellaneous lowFsSpace RFSwitch(config)# RFSwitch(config)#snmp-server enable traps redundancy memberUp RFSwitch(config)# RFSwitch(config)#snmp-server enable traps snmp linkup RFSwitch(config)#
