Download MOTO GUZZI NORGE 1200 Specifications

Norge GT 8v
•
Braking system
The following operations are to be carried out with brake disc fitted on the
wheel.
•
Check the disc for wear by measuring
the minimum thickness with a micrometer in different points. If the minimum thickness, even in a single point
of the disc, is less than the minimum
value, replace the disc.
Disc thickness minimum value: 4.5 mm (0.18
in)
Front brake disc
Disc Inspection
CAUTION
THE FRONT BRAKE DISC SHAPE DOES NOT CHANGE THE OPERATING AND MAINTENANCE
SPECIFICATIONS OF THE SYSTEM.
•
The following operations must be carried out with the brake discs fitted on
the wheel; they refer to a single disc,
but are valid for both.
•
Check the disc for wear by measuring
the minimum thickness with a micrometer in different points. If the minimum thickness, even in a single point
of the disc, is less than the minimum
value, replace the disc.
Disc thickness minimum value: 4 mm (0.16 in)
Front brake pads
BRAK SYS - 325
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten