Download Sealeyy VS8196 Operating instructions

Patented One-Click I/M Readiness
Check
EOBD Code Readers
Save time and money, plus take the guess work out of fault finding and
diagnosis with CAN enabled EOBD diagnostic tools. Interrogate your
vehicle’s engine and emission faults with our updated range of tools
which reads and clears both pending and confirmed Diagnostic Trouble
Codes (DTC’s). The VS8800 is a new entry level tool which will display only
the DTC number – the description can be looked up on the CD supplied.
The VS8801 and VS8802 feature full colour screens and patented
one-click I/M readiness function. Both the larger units will read live data
direct from the vehicles ECU and the VS8802 will allow you to graph the
data enabling fast interpretation of engine per formance. In the event
that the software requires updating or the EOBD protocols are updated,
the VS8801 and VS8802 may be updated using a USB inter face. The
results from the VS8802 may be saved out to PC for sharing.
A faulty component monitored by EOBD does not
always turn on the MIL light on the dash board
straight away. The vehicle has to run through a
drive cycle to pend, then confirm DT Cs, before then
turning on the MIL light. Sealey
’s VS8801 and
VS8802 have a new feature which, using only
one click of a button , can tell the technician
which groups of sensors are ready for diagnosis and
have gone through the drive cycle. F
or Pre
MOT work this is vital and enables the technician to
confirm that the MIL light will not come back on during
the MOT, creating a fail.
The VS8802 is also loaded with a Tech-Tips data base allowing you a more
rounded description of the DTC fault and some ideas about where to look
next to correct the fault – lik e having a professional technician on call
24/7.
See the table below for a full list of features and vehicle coverage.
EOBD Code Reader
with Live Data
EOBD Code Reader
NEW
EOBD Code Reader Memory & Graphics
NEW
Colour
NEW
Colour
Tech Tips
OFFER PRICE
£49.95 exc VAT
£59.94 inc VAT
• Model No.
VS8800
• List Price
£64.95
OFFER PRICE
£69.95 exc VAT
£83.94 inc VAT
• Model No.VS8801
• List Price £95.95
VS8800
VS8801
VS8802
Works with all 1996 and later OBDII / EOBD compliant
vehicles
EOBD Code Reader Features
Scans for Diagnostic Trouble Codes (DTC) - The cause
of the 'Engine Malfunction Indicator Light' (MIL)
Scans for pending DTCs
Retrieves generic (P0, P2, P3 & U10) and manufacturer
specific (P1, P3 & U1) DTCs
Turns off MIL light, clears DTCs and resets monitors
Displays DTC definitions on screen
View freeze frame data
Displays monitor and I/M readiness status (emissions)
Patented One-Click I/M Readiness button (emissions)
Retrieves vehicle information (VIN, CID & CVN)
Supports CAN and other current EOBD Protocols
• Model No.VS8802
• List Price £199.95
£149.95 exc VAT
£179.94 inc VAT
Diagnostic guidance and tips in the palm of your hand.
Supports the new extended sensor list (SAE J1979 - 2007)
Reads live ECU/PCM data stream
Displays live O2 sensor data
Graphing function for live data (96on)
Read, store and playback live sensor data
Performs 'modules present' test
Print out data via PC
Update software via the internet
Built-in EOBD library lookup
Diagnostic trouble tips and repair information guide
2
OFFER PRICE
Large, easy-to-read LCD display
Backlit screen
Easy-to-use
Prices exclude VAT unless stated otherwise
Watch live data on the VS8801 and the VS8802. VS8802 will additionally
allow selected data to be graphed.
Promotion Code: VST12.09