Download ATV 200 Operator`s manual

Wheels & Tyres
To determine the correct tyre pressure:
1. Determine the maximum weight of the
sprayer when loaded (do not forget to add
the weight of the rinse water tank and the
foam marker tank when filled).
All tyres used on Goldacres sprayers have
been designed to carry the maximum
loaded weight of the sprayer when travelling
at 20 km/h. The load capacity of the tyres
decreases as travelling speed increases so
it is important to heed this travelling speed
limit.
2. Allow for each tyre to carry half the
maximum loaded weight of the sprayer
(this does not allow for any load on the
tractor pull or cyclical loading, which
provides for a safety margin).
The tyre pressure also needs to be checked
regularly (check every 8 to 12 hours of
operation) and maintained at the required
tyre pressure.
3. Determine what tyre size and ply is on
the sprayer.
4. Determine what appropriate tyre
pressure will provide the load capacity
required by the respective tyre as indicated
in the following table.
There are many factors concerning the
appropriate tyre pressure for a particular
tyre and load. For example, the tyre size,
rim type, tyre status (driven or free rolling),
load, speed, haul length and ply rating all
need to be considered when determining
the tyre pressure.
Goldacres Tyre Chart
Tyre Size
Ply
Rated Pressure (KPa)
Rated Capacity (Kg)
22x11.00-8 nobby tyre
6
48
234
13