Download Maxtor SATA/150 Technical data

Installation
Figure 3-3 20-Pack Shipping Container
3.3
Hardware Options
3.3.1
SATA (Serial ATA) Interface Connector
The Maxtor DiamondMax 10 80/100/120/160/200/250/300GB Serial ATA hard
disk drive ships with 2 no connect (NC) pins for the purpose of storing a jumper
when not in use. For normal operations, no action is necessary. However, if your
motherboard does not support the Gen. II (3Gbps) data rate, you will need to limit
the data transfer rate by transferring the jumper to the pins as shown in Figure 3-4.
3-4
DiamondMax 10 80/100/120/160/200/250/300GB Serial ATA