Download AOC i2340Ve Service manual
Transcript
23" LCD Color Monitor AOC i2430Ve Service Service Service Horizontal Frequency 30-83 kHz TABLE OF CONTENTS Description Page Description Page Table of Contents…………………..…………………..…...1 6.3.Key Board..……….........................................32 Revision List.…...................................................……......2 6.4.Light Sensor Board...............................................33 Important Safety Notice.….….............................……......3 7.PCB Layout..………..............................................34 1.Monitor Specification..............................………............4 7.1.Main Board………..…........................................34 2.LCD Monitor Description……….…………………….......5 3.Operation Instruction.…………...................……...........6 7.2.Power Board….…..............................................35 3.1.General Instructions....................................…..........6 7.3.Key Board………..…..........................................37 3.2.Control Buttons and Connections...............................6 7.4. Light Sensor Board.….........................................37 3.3.OSD Setting…...........................................................8 8.Maintainability………............................................38 4.Input/Output Specification...............……………….......20 8.1.Equipments and Tools Requirement…...............38 4.1.Input Signal Connector...............………..................20 8.2.Trouble Shooting…..………...............................39 4.2.Preset Display Modes……..........................21 9.FOS Testing………..…………………………………43 4.3.Panel Specification…………..……………………..22 5.Block Diagram….........................................................24 10.Firmware and DDC Instruction……………….….47 5.1.Main Board…..….............................................24 11.White-Balance,Luminance Adjustment…............65 5.2.Power Board…………..…………………………......25 12. Mechanical Instructions………………….....….......67 6.Schematic…………..….........................................26 13.Monitor Exploded View……................................72 6.1.Main Board..…….…...........................................26 14.BOM List…………..……………………….............73 6.2.Power Board..……….........................................30 SAFETY NOTICE ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES. CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING 1 Revision List Revision Date Revision History Remark TDAGNT2EWWA4HNE A00 Jan.-12-2011 Initial release TDAGNT2DWWA4HNE TDAGNT2FWWA4HNE 2 Important Safety Notice Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service procedures recommended by AOC and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended. It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected. Hereafter throughout this manual, AOC Company will be referred to as AOC. WARNING Use of substitute replacement parts, which do not have the same, specified safety characteristics may create shock, fire, or other hazards. Under no circumstances should the original design be modified or altered without written permission from AOC. AOC assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability. FOR PRODUCTS CONTAINING LASER: DANGER-Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM. CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION -The use of optical instruments with this product will increase eye hazard. TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL. Take care during handling the LCD module with backlight unit -Must mount the module using mounting holes arranged in four corners. -Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen. -Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel. -Protect the module from the ESD as it may damage the electronic circuit (C-MOS). -Make certain that treatment person’s body is grounded through wristband. -Do not leave the module in high temperature and in areas of high humidity for a long time. -Avoid contact with water as it may a short circuit within the module. -If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may damage the panel.) 3 Monitor Specifications 4 LCD Monitor Description The LCD MONITOR will contain a main board, a power board, a key board which house the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage. Monitor Block Diagram LED Drive. Flat Panel and LED backlight PWPC board (Include: adapter, inverter) RS232 Connector For white balance adjustment in factory mode Main Board Key board AC-IN 100V-240V Video signal DDC HOST Computer 5 3. Operating Instructions 3.1 General Instructions Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these settings, the picture can be adjusted to your personal preferences. * The power cord should be connected. * Press the power button to turn on the monitor. The power indicator will light up. 3.2 Control Buttons and Connections 4:3 or wide image ratio hot key: When there is no OSD, press> continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust) e-Sensor hot key. When there is no OSD,Press < continuously to select the e - Sensor mode(e-Sensor mode hot key may not be available in all mode ls). e-Sensor:The infrared sensor can detect if user is in front of monitor and adjust monitor brightness automatically to save power. When it is on, we can select the detect range [Near,Average,Far] by using hot-key. Auto configure hot key When there is no OSD, press Auto/Source button continuously about 2 second to do auto configure (Only for the Source hot key When the OSD is closed, press Source butt on will be Source hot key function. Press Source button continuously to select the input source showed in the message bar , press Menu/Enter button to change to the source selected. 6 1.Power 2.Analog (DB-15 VGA cable) 3.Power To protect equipment, always turn off the PC and LCD monitor before connecting. 1. Connect the power cable to the AC port on the back of the monitor. 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port. 3. (Optional – Requires a video card with DVI port) - Connect one end of the DVI cable to the back of the monitor and connect the other end to the computer‟s DVI port. 4. Connect the audio cable to audio in port on the back of the monitor. 5. Turn on your monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting. 7 3.3 OSD Setting 1) Press the MENU-button to activate the OSD window. 2) Press ◄ or ► to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it. 3) Press ◄ or ► to change the settings of the selected function. Press ◄ or ► to select another function in sub-menu . Press AUTO to exit . If you want to adjust any other function, repeat steps 2-3. 4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. 5)e-Sensor hot key: When there is no OSD,Press ◄ continuously to select the e-Sensor mode(e-Sensor mode hot key may not be available in all models). Notes: 1) If the product has only one signal input, the item of "Input Select" is disable to adjust. 2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to adjust. 3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly. 8 Luminance Press (Menu) to display menu. Press Menu to display MENU Press ◄ or ► to select press (Luminance), and to enter. Press ◄ or ►to select submenu, press enter, and press ◄ or ► to adjust. Press to exit. 9 to Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Sports Sports Mode Gamma1 Adjust to Gamma1 Gamma2 Adjust to Gamma 2 Gamma3 Adjust to Gamma 3 On/OFF Enable dynamic contrast ratio Eco mode Gamma DCR 10 Image Setup Press (Menu) to display menu. Press ◄ or ► to select and press (Image Setup), to enter. Press ◄ or ► to select submenu, press enter, and press ◄ or ► to adjust. Press to to exit. Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 0-100 Adjust the horizontal position of the picture. V.Position 0-100 Adjust the vertical position of the picture. 11 Color Temperature Press (Menu) to display menu. Press ◄ or ► to select (Color Temperature), and press to enter. Press ◄ or ► to select submenu, press enter, and press ◄ or ► to adjust. Press to to exit. Warm 6500K Recall Warm Color Temperature from EEPROM. Normal 7300K Recall Normal Color Temperature from EEPROM. Cool 9300K Recall Cool Color Temperature from EEPROM. sRGB User Recall SRGB Color Temperature from EEPROM. Red Red Gain from Digital-register Green Green Gain Digital-register. Blue Blue Gain from Digital-register 12 Color Boost Press (Menu) to display menu. Press ◄ or ► to select and press (Color Boost), to enter. Press ◄ or ► to select submenu, press enter, and press ◄ or ► to adjust. Press to to exit. Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disable or Enable Green Field Mode Sky-blue on or off Disable or Enable Sky-blue Mode AutoDetect on or off Disable or Enable AutoDetect Mode Demo on or off Disable or Enable Demo 13 Picture Boost Press (Menu) to display MENU. Press ◄ or ► to select press (Picture Boost); and to enter. Press ◄ or ► to select Bright Frame. Select “on” to activate Picture Boost. Press ◄ or ► to select submenu, press enter, and press ◄ or ► to adjust. Press to exit. Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0-100 Adjust Frame horizontal Position V.position 0-100 Adjust Frame vertical Position Bright Frame on or off Disable or Enable Bright Frame 14 to OSD Setup Press (Menu) to display menu. Press ◄ or ► to select and press (OSD Setup), to enter. Press ◄ or ► to select submenu, press enter, and press ◄ or ► to adjust. Press to exit. OSD Setup H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-100 Adjust the vertical position of OSD Timeout 5-120 Adjust the OSD Timeout Transparence 0-100 Adjust the transparence of OSD Language Select the OSD language 15 to Extra Press (Menu) to display menu. Press ◄ or ► to select and press (OSD Setup), to enter. Press ◄ or ► to select submenu, press to enter, and press ◄ or ► to adjust. Press 16 to exit. Auto Select to Auto Detect input signal Analog Select Analog Sigal Source as Input Digital Select Digital Sigal Source as Input Auto Config yes or no Auto adjust the picture to default Image Ratio wide or 4:3 Select wide or 4:3 format for display DDC-CI yes or no Turn ON/OFF DDC-CI Support Off Timer 0~24hours Select timing to turn off the monitor. Input Select Show the information of the main image and Information sub-image source 17 Reset Press (Menu) to display menu. Press ◄ or ► to select press (Reset), and to enter. Press◄ or ► to select YES or NO. Press Reset yes or no to exit. Reset the menu to default 18 Exit Press (Menu) to display menu. Press ◄ or ► to select to enter. Exit (Exit); and press Exit the main OSD LED Indicator Status LED Color Full Power Mode Blue Active-off Mode Orange 19 4. Input/Output Specification 4.1 Input Signal Connector Analog connectors Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15-Pin Side of the Signal Cable Video-Red Video-Green Video-Blue N.C. Detect Cable GND-R GND-G GND-B +5V Ground N.C. DDC-Serial data H-sync V-sync DDC-Serial clock DVI connectors Pin No. 1 2 3 4 5 6 7 8 Signal Name TMDS Data 2TMDS Data 2+ TMDS Data 2/4 Shield TMDS Data 4TMDS Data 4+ DDC Clock DDC Data N.C. Pin No. 9 10 11 12 13 14 15 16 Signal Name TMDS Data 1TMDS Data 1+ TMDS Data 1/3 Shield TMDS Data 3TMDS Data 3+ +5V Power Ground(for+5V) Hot Plug Detect 20 Pin No. 17 18 19 20 21 22 23 24 Signal Name TMDS Data 0TMDS Data 0+ TMDS Data 0/5 Shield TMDS Data 5TMDS Data 5+ TMDS Clock Shield TMDS Clock + TMDS Clock - 4.2 Preset Display Modes 21 4.3 Panel Specification 4.3.1 General Features LM230WF3 is a Color Active Matrix Liquid Crystal Display with a Light Emitting Diode ( White LED) backlight The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally black mode. It has a 23 inch diagonally measured active display area with FHD resolution (1080 vertical by 1920 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16,7M colors with A-FRC (Advanced Frame Rate Control). 4.3.2 General Specifications 4.3.3 Electrical Characteristics (Ta= 25± 2℃, VLCD =5.0V, VLCD=5.0V, Fv=60Hz,) LED Bar Electrical Characteristics 4.3.4Optical Characteristics 22 (Ta=25 °C, VLCD=5V, fV=60Hz Dclk=144MHz, IBL=110mA) 23 5. Block Diagram 5.1 Main Board Crystal 12MHZ LCD Interface (X401) (CN301) FLASH MEMORY Scalar NT68668AUFG Pm25LD020C-SCE (Include :MCU,ADC,OSD etc) (U402) (U401) DVI Input signal H sync V sync RGB D-Sub DVI Connector Connector (CN101) (CN102) DDC1_SCL DDC1_SDA DDC2_SCL DDC2_SDA EEPROM EEPROM M24C02 M24C02 (U101) (U102) 24 Key Control Interface (CN401) 5.2 Power Board AC input EMI filter Transformer Bridge Rectifier and Filter 14.5V Rectifier diodes (T901) 5V Start Resistor (R904) Power Switch (Q901) PWM Control LD7750GS (IC901) Photo coupler (IC903) 14.5V Feedback Circuit Regulator (IC904) D801 L801 LED MOSFET (Q806) (CN803) OFF DIM PWM Control MP3389EF (U801) 25 6. Schematic 6.1 Main Board 715G4002M01000004S FB102 0R05 1/10W R103 100OHM1/16W R104 100OHM1/16W R106 2.2K 1/16W R107 2.2K 1/16W C103 22P 50V C104 22P 50V R101 10 5 9 4 8 3 7 2 6 1 DSUB_SCL 15 14 100OHM1/16W 13 DSUB_SDA 12 100OHM1/16W FB103 VGA_G+ V_Sy nc C125 100N 16V VGA_BVGA_B+ ZD101 VGA_G- RLZ5.6B VGA_G+ VGA_RVGA_R+ VGA_G+ 1 2 3 U103 AOZ8105CI I/O1 I/O4 GNDVDD I/O2 I/O3 R109 47 OHM 1/16W C106 47nF 16V DSUB_B- 5 R110 470 OHM 1/16W C107 1N 50V DSUB_SOG 5 R111 10OHM1/16W C108 47nF 16V DSUB_G+ 5 R114 47 OHM 1/16W C110 47nF 16V DSUB_G- 5 R115 10OHM1/16W C111 47nF 16V DSUB_R+ 5 C114 47nF 16V DSUB_R- 5 C109 5PF 50V 75OHM 1/16W ESD_VCC FB101 DET_VGA 6 5 4 VGA_R+ 1 VGA_B+ C126 100N 16V 2 0R05 1/10W R116 11/30/2009 C113 5PF 50V 75OHM 1/16W VGA_R- R117 47 OHM 1/16W VCC3.3 CMVCC1 DSUB_5V 2 DVI_5V DET_DVI DVI_HPD R120 10K+-5%1/16W FB106 11 3 19 22 R133 390K +/-5% 1/16W DDC2_SCL 5 DDC2_SDA 5 300 OHM C112 100N 16V 18 17 10 9 2 1 13 12 5 4 21 20 23 24 R126 R127 R128 R129 R130 R131 10OHM1/16W RX0P 10OHM1/16W RX0N 10OHM1/16W RX1P 10OHM1/16W RX1N 10OHM1/16W RX2P 10OHM1/16W RX2N RX0P RX0N RX1P RX1N RX2P RX2N DET_VGA R135 100K 1/16W DET_DVI R139 220K 1/16W 5% D101 BAV70 ESD_VCC DET_CABLE 5 5 5 5 5 5 5 R124 4.7K 1/16W DDC1_SCL DDC1_SDA 5 DDC_WP RXCP RXCN 1 2 3 I/O1 I/O4 GNDVDD I/O2 I/O3 ESD_VCC1 6 5 4 1 2 3 C121 100N 16V U105 AOZ8105CI I/O1 I/O4 GNDVDD I/O2 I/O3 ESD_VCC1 6 5 4 1 2 3 C122 100N 16V U106 AOZ8105CI I/O1 I/O4 GNDVDD I/O2 I/O3 FB105 C118 1N 50V R137 4.7K 1/16W C120 100N 16V Key Component Date 26 Victory Electronics Co . , G4002-M0D-000-0040-100416 2.0.INPUT Tuesday , April 27, 2010 Ltd. ) C119 1N 50V C117 220N16V U102 8 7 6 5 5 DDC_WP T P V ( Top C115 100N 16V R136 22K 1/16W R138 4.7K 1/16W DDC2_SCL DDC2_SDA 絬隔瓜絪腹 DVI_5V 300 OHM D102 BAV70 ESD_VCC1 6 5 4 VCC A0 WP A1 SCL A2 SDA VSS FB104 ESD_VCC1 U107 AOZ8105CI 1 2 3 4 CAT24C02WI-GT3 300 OHM RXCP 5 RXCN 5 C116 220N16V U101 8 7 6 5 3,4,5 CMVCC1 10OHM1/16W 10OHM1/16W R123 22K 1/16W R125 4.7K 1/16W CMVCC1 R132 R134 3 DDC2_SCL DDC2_SDA R118 100OHM1/16W R119 100OHM1/16W 26 25 GND GND DAT0+ DAT0DAT1+ DAT1DAT2+ DAT2DAT3+ DAT3DAT4+ DAT4DAT5+ DAT5clk+ clk- R112 11/30/2009 DSUB_B+ 5 1 1/3shield 2/4shield 0/5shield clk shield 2 0R05 1/10W C124 100N 16V VGA_R+ CN102 JACK VSY NC SY NC GND DDC SCL DDC SDA +5V HPD 1 VGA_G- 2010/1/13 modify type 8 15 6 7 14 16 75OHM 1/16W DSUB_5V 17 11 ESD_VCC H_Sy nc 6 5 4 C102 47nF 16V C105 5PF 50V 2 DDC1_SDA 5 DDC1_SDA R113 DET_VGA R105 10OHM1/16W R108 3 DDC1_SCL 5 DDC1_SCL 16 DSUB_SDA I/O1 I/O4 GNDVDD I/O2 I/O3 2 0R05 1/10W VGA_B- U104 AOZ8105CI 1 2 3 1 11/30/2009 C127 C128 NC/22P 50VNC/22P 50V DSUB_SCL CN101 D-SUB 15P VGA_B+ DSUB_H 5 DSUB_V 5 1 H_Sy nc R102 V_Sy nc VCC A0 WP A1 SCL A2 SDA VSS 1 2 3 4 CAT24C02WI-GT3 OEM MODEL AOC e2040VA Size B TPV MODEL Rev C 称爹 <称爹> e2040VA PCB NAME Sheet 2 of 6 PA[0..9] 5 PB[0..9] PA0 PA1 PA2 PA3 PA4 PA5 PA6 PA7 PA8 PA9 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 PB[0..9] PB0 PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8 PB9 LVA3P LVA3M LVACKP LVACKM LVA2P LVA2M LVA1P LVA1M LVA0P LVA0M LVB3P LVB3M LVBCKP LVBCKM LVB2P LVB2M LVB1P LVB1M LVB0P LVB0M LVB0M LVB1M LVB2M LVBCKM LVB3M LVA0M LVA1M LVA2M LVACKM LVA3M RXO0RXO1RXO2RXOCRXO3RXE0RXE1RXE2RXECRXE3- CONN 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 RXO0+ RXO1+ RXO2+ RXOC+ RXO3+ RXE0+ RXE1+ RXE2+ RXEC+ RXE3+ 31 5 PA[0..9] 32 CN301 LVB0P LVB1P LVB2P LVBCKP LVB3P LVA0P LVA1P LVA2P LVACKP LVA3P PANEL_VCC R301 220 OHM 1/4W PANEL_VCC R302 220 OHM 1/4W C301 100N 16V FB301 1 2 120 OHM CMVCC1 C302 22UF 16V 2,4,5 CMVCC1 R306 Q301 AO3401A Q302 5 PPWR_ON# LMBT3904LT1G 22K 1/16W R303 4.7K 1/16W 11/30/2009 R307 NC C304 100N 16V NC/AO4411 C303 220N16V CMVCC1 4 3 2 1 R304 U301 G S S S 100K 1/16W D D D D 5 6 7 8 R305 10K+-5%1/16W 3D 1 G 2 S C305 1UF16V R308 NC/10K1/16W AO3401L OEM MODEL AOC e2040VA Size B 絬隔瓜絪腹 G4002-M0D-000-0040-100416 TPV MODEL Rev C Key Component 3.0.OUTPUT PCB NAME 称爹 <称爹> TPV Date 27 ( Top Victory Electronics Tuesday , April 27, 2010 Co . , Ltd. ) Sheet e2040VA 3 of 6 SOT 252 12 VIN VOUT(TAB) ADJ(GND) 1 +12V 1 2 3 4 5 6 7 8 9 10 U702 G1117-33T43UF 3 2 1 2 D707 SR34 Both 223 and 252 foot-print CMVCC1 1 R707 0R05 1/10W BKLT-VBRI BKLT-EN D708 SR34 R708 NC/0R05 1/10W 5% CONN SOT 223 2 11 CMVCC1 CN702 VCC3.3 U701 3 VO Dropout voltage must < 0.8V @ 600mA 2 GND VI C709 100N 16V 1 C708 100N 16V C707 22UF 16V VCC3.3 VCC3.3 1 CMVCC1 SOT 223 D703 SR34 R703 10K+-5%1/16W 3 VI VO Dropout voltage must < 0.8V @ 400mA 2 Q701 LMBT3904LT1G D704 SR34 Both 223 and 252 foot-print 2 on_BACKLIGHT 5 1 C702 100N 16V GND 1 BKLT-EN U704 2 R702 10K+-5%1/16W R704 22K 1/16W SOT 252 VCC1.8 C706 100N 16V C705 100N 16V 1 CMVCC1 GND U703 NC/AZ1117D-1.8-E1 3 2 IN OUT C704 22UF 16V R705 10K+-5%1/16W R706 BKLT-VBRI adj_BACKLIGHT 5 100OHM1/16W 2010/1/25 Add FB703 Place a large Pad with TOP C713 100N 16V FB703 0R05 1/10W Pad 璶 TOP and Button常璶Τ R712 100K 1/16W Thermal Pad BST SW VIN EN FREQ COMP GND FB U705 1 2 3 4 Pad 璶 TOP and Button 常璶Τ L701 CMVCC1 22uH CMVCC1 2,3,5 2 9 8 7 6 5 MP1584EN C710 1N 50V C711 NC/1N 50V R713 6.8K +-1% 1/16W C714 1N 50V 1 D701 SR34 C720 100N 16V R711 33K 1/16W 5% R726 100K 1/16W 2010/1/13 180k => 300k +12V 6 FB702 1 + 2010/1/13 SMD => Dip C718 180uF 16V 2010/1/25 Add C723 C719 100nF 25V + C716 470uF 10V C717 100N 16V ZD702 NC/RLZ6.2B 11/30/2009 C716 ぃ 繦獽 ノ, DC-DC pulse 穦Τ noise CN701 2 BEAD C721 10uF 25V C723 10uF 25V R714 1.3K 1% Add C714 reduce noise +12V C715 1N 50V 2010/1/13 1000p => NC 2 C722 150pF 50V R727 300K 1 C712 100nF 25V 3 2 1 JACK 2010/1/13 Add C721 T P V ( Top Size G4002-M0D-000-0040-100416 TPV MODEL Rev C 4.0.POWER PCB NAME 称爹 <称爹> Date 28 Victory Electronics Tuesday , April 27, 2010 Co . , Ltd. ) C OEM MODEL AOC e2040VA 絬隔瓜絪腹 Key Component Sheet e2040VA 4 of 6 VCC1.8 VCC3.3 CVDD VCC3.3 2,4 AVCC VCC3.3 DVDD ADC_VAA AVCC CVDD FB401 0R05OHM1/8W 4 VCC1.8 ADC_BIAS C415 1UF16V C438 100N 16V 100N 16V 100N 16V 100N 16V 100N 16V 2 2 2 2 2 2 2 2 28 C422 100N 16V 2 DSUB_H 2 DSUB_V 2 DSUB_SOG 2 DSUB_G+ 2 DSUB_G- 17 C424 1UF16V 41 42 B0+ B0- 19 20 21 22 23 R0+ R0- 24 25 2 DSUB_R+ 2 DSUB_R- RX2+ RX2RX1+ RX1RX0+ RX0RXC+ RXC- 51 116 90 2 17 28 26 6 15 52 115 119 43 T0M T0P T1M T1P T2M T2P TCLK1M TCLK1P T3M T3P T4M T4P T5M T5P T6M T6P TCLK2M TCLK2P T7M T7P HSY NCI1 VSY NCI1 BIN1+ BIN1SOG1I GIN1+ GIN1RIN1+ RIN1- 5V_DET 2 DET_CABLE KEY 1 KEY 2 C425 100N 16V DDC2_SDA DDC2_SCL DDC1_SDA DDC1_SCL DDCSDA2 DDCSCL2 DDCSDA1 DDCSCL1 DET_CABLE R436 1K 1/16W R437 1K 1/16W 34 35 46 47 30 33 125 126 VCKI V7 V6 V5 V4 V3 V2 V1 V0 PB7/DDC_SDA1* PB6/DDC_SCL1* PB5/DDC_SDA0* PB4/DDC_SCL0* PB3/ADC3/INTE1 PB2/ADC2/INTE0 PB1/ADC1 PB0/ADC0 100 99 98 97 96 95 94 93 92 91 88 87 86 85 84 83 82 81 80 79 77 76 75 74 73 72 71 70 69 68 PA0 PA1 PA2 PA3 PA4 PA5 PA6 PA7 PA8 PA9 PB9 PB8 PB7 PB6 PB5 PB4 PB3 PB2 PB1 PB0 PA9 PA8 PA7 PA6 PA5 PA4 PA3 PA2 PA1 PA0 PA[0..9] 62 61 60 59 58 57 56 55 54 PB[0..9] 3 PWMA* PWMB* PC7 PC6 PC5 PC4/PWM1 PC3/PWM0 PC2 PC1* PC0* P35 P34 P31/TXD P30/RXD RSTB OSCI 40 39 38 37 36 67 66 65 on_BACKLIGHT LED_GRN/BLUE LED_ORANGE R426 1K 1/16W 11/30/2009 adj_BACKLIGHT 4 Volume 6 on_BACKLIGHT 4 POWER_KEY # AUDIO_MUTE AUDIO_MUTE 6 PS_O/P PS_EN PS_DISTANCE Panel_ON PPWR_ON# 3 R431 U402 Vcc HOLD C DIO SPI_CK SPI_SI CMVCC1 0R05 OHM CMVCC1 VCC3.3 2,3,4 CMVCC1 A25L020AO-F CMVCC1 VCC3.3 R407 NC/0R05 1/16W R406 R408 0R05 OHM VCC3.3 R411 4.7K 1/16W 2010/1/25 Q401 LMBT3906LT1G PS_O/P PS_EN R419 R420 100OHM1/16W 100OHM1/16W PS_DISTANCE R422 4.7K 1/16W CONN 1 2 3 4 5 C408 1UF16V CONN LED_R C433 ZD402 C434 ZD403 C435 LED_GRN/BLUE R412 10K+-5%1/16W 1 FB408 Q402 LMBT3906LT1G 1 LED_ORANGE R413 10K+-5%1/16W 1 CMVCC1 R405 330OHM 1/10W 2010/1/25 LED 獹 2 NC/120 OHM 3 6 R418 10K+-5%1/16W FB409 C436 NC/100N 16V 1 LED_R 2 NC/120 OHM 7 R417 10K1/16W R404 220 OHM 1/10W C432 2 LED_G CN402 ZD401 C431 2 2010/1/25 KEY 1 KEY 2 POWER_KEY # LED_G LED_R 3 R428 NC/0R05 1/16W CN401 1 2 3 4 5 6 7 R409 NC/0R05 1/16W R410 4.7K 1/16W R427 0R05 OHM R433 NC/RLZ5.6B S DO W Vss R432 100N 16V R402 10K+-5%1/16W 8 7 6 5 8 1 2 3 4 9 SPI_CE SPI_SO 100OHM1/16W 3.9K1/16W VCC3.3 44 3 109 64 78 101 18 12 9 27 89 63 112 111 NT68668AFG/C adj_BACKLIGHT Volume 117 118 103 102 124 123 122 110 121 120 100N 16V OSCO DVDD C429 220N16V PA7/PWM9* PA6/PWM8* PA5/PWM7* PA4/PWM6* PA3/PWM5 PA1/PWM3 PA2/PWM4 PA0/PWM2 113 114 NC/RLZ5.6B X401 R434 14.31818MHZ/32PF 1M 1/16W 128 C428 47pF 50V INT_VSO INT_HSO 3.9K1/16W C427 100N 16V SPI_CE SPI_SO SPI_SI SPI_CLK PD4 PD5 PD6 100N 16V 127 2 C426 47pF 50V 1 1 R403 10K+-5%1/16W 12/3/2009 PA[0..9] 3 PB[0..9] PB0 PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8 PB9 NC/RLZ5.6B R435 100OHM1/16W 104 105 106 107 108 48 29 49 50 31 32 DVDD R401 100N 16V 3.9K1/16W DDC_WP 2 DDC_WP WP C405 C404 4.7UF 10V C0805 11/30/2009 SPI_CE SPI_SO SPI_SI SPI_CK WP GND DGND GND DGND/CGND DGND/CGND NC PGND AGND AGND ADC_GNDA NC NC NC NC R416 220K 1/16W 5% 2 2 2 2 ADC_VAA 53 NC NC NC NC NC NC NC NC NC NC CMVCC1 R415 100K 1/16W C403 26 NC REXT 119 C402 100N 16V 100N 16V 100N 16V 100N 16V C423 4.7UF 10V C0805 AHS0 AVS0 SOG_DET G0+ G0- 2 DSUB_B+ 2 DSUB_B- ADC_BIAS 4 5 7 8 10 11 13 14 115 C401 100N 16V C421 4.7UF 10V C0805 RX2P RX2N RX1P RX1N RX0P RX0N RXCP RXCN 16 RX2+ RX2RX1+ RX1RX0+ RX0RXC+ RXC- DVDD DVDD DVDD DVDD_ZP 116 C437 ADC_BIAS ADC_VAA33 90 C419 AVCC AVCC 53 C418 ADC_VAA18 51 C417 U401 CVDD CVDD CVDD_ZP 2 FB402 300OHM 100N 16V R414 470R 1/16W 1% AVCC C416 4.7UF 10V C0805 FB406 NC/300OHMADC_VAA33 ADC_VAA33 PLL_GND C414 1UF16V 45 C413 4.7UF 10V C0805 FB405 DVDD 300OHM C407 52 C439 4.7UF 10V C0805 15 6 FB407 300OHM C406 4.7UF 10V C0805 PLL_DVDD FB404 300OHM FB403 300OHM 2010/1/25 LED 獹 T P V ( Top Size G4002-M0D-000-0040-100416 TPV MODEL Rev C 5.0.SCALER PCB NAME 称爹 <称爹> Date 29 Victory Electronics Tuesday , April 27, 2010 Co . , Ltd. ) C OEM MODEL AOC e2040VA 絬隔瓜絪腹 Key Component Sheet e2040VA 5 of 6 6.2 Power Board Adapter 715G 901 2 4A 51 OHM +-5% 1/4W R923 51 OHM +-5% 1/4W R913 R912 51 OHM +-5% 1/4W 430K 1/4W C926 R922 R967 430K 1/4W 2 430K 1/4W 1 ! + - BD901 GBU408 C904 100uF 450V T901 8 2N2 500V L902 1.1uH 2 +12V 2 C925 R904 10nF 1N4007 D902 4 47KOHM +-5% 1/4W C922 D901 1N4007 R907 3 9 10 4 5 2R2 1/4W 5% C919 + 680UF 25V R924 + C921 (NC)10K 1/8W 5% 680UF 25V C920 4.7uF/25V C918 NC 6 + C906 C909 3300pF 250V 47uF/50V 7 11 更改料件 1 0.1uF ! ! 2 3 L901 30mH IC901 1 2 3 4 C903 0.47UF275V ! R901 R903 680K 1/4W +-5% R902 CT HV COMPNC CS VCC GND OUT 8 7 6 5 R986 20K +-5% 1/8W Q901 R908 47 OHM 1/4W +-5% C908 LD7750GS 100K 1/8W LED2 LED SMK0965F 220R 1/8W 5% 1 680K 1/4W +-5% 680K 1/4W +-5% ! C916 D904 V30100C-E3/4W 1 1 + ! C914 2N2 500V R906 2200PF2KV 3 4 R914 3 更改料件 430K 1/4W C912 330pF NR901 NTCR R909 R910 10K OHM 1/4W +-5% R911 0.62OHM2W 2 t R918 510 OHM +-1% 1/4W PC123X2Y FZOF 0.001uF C901 0.001uF C902 R968 2.2KOHM 1/10W R919 9.76K1/4W 2 F901 FUSE IC903 3 ! R920 10R 1/4W 1 4 ! C911 0.01uF C915 R917 0.022uF/50V IC904 4.7KOHM +-5% 1/4W R916 2K49 1/8W 1% 水波纹干扰对策 R921 C923 1U 25V 3 1 MOHM +-5% 1/4W 2 ! 1 CN901 SOCKET OEM MODEL HP X20/X22/X23LED Size 絬隔瓜絪腹 G901-1-15-X-3-100201 TPV MODEL ADPCA1248HA1 Rev 1.0 Key Component 02.ADAPTER PCB NAME 称爹 <称爹> T P V ( Top Date 30 Victory Electronics Co . , Wednesday , June 30, 2010 Ltd. ) Sheet 715G901-1-15 2 of 2 A3 Converter 715G4119P01002004C GATE Q806 1 2 3 4 CN801 8 7 6 5 D801 L801 1 2 11 22uH 12 ON/OFF DIM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 C801 0.47uF 50V R806 1K 1/10W C802 68NF 50V R807 100K 1/10W R808 1K 1/10W R810 100K 1/10W R818 0R05 1/4W C808 NC R802 200K 1/10W 5% R803 30K 1/10W 1% +14.5V R819 30K 1/10W 1% MP3389EF NC NC VIN VFAULT VCC GATE COMP PGND EN ISENSE DBRT OVP GND LED1 OSC LED2 ISET LED3 BOSC LED4 LED12 LED5 LED11 LED6 LED10 LED7 LED9 LED8 28 27 26 25 24 23 22 21 20 19 18 17 16 15 DR 4.7UF 100V + GATE OVP R801 C803 47N 50V R805 300K +-5% 1/8W + C810 10 OHM 1% 1/4WNC Q801 NC/AOD4126 C804 47N 50V C805 220P 100V OVP R809 R815 R813 R814 1R 1/8W 5% NC 7.5K +-1% 1/10W R812 NC R811 R804 100K 1/10W C806 100pF 50V 0.3 OHM 0.3 OHM 1 2 3 4 R828 1 OHM +-5% 1/8W Q802 NC/MMBT3904 R825 NC R8271 OHM +-5% 1/8W 6 R824 NC R821 Q804 NC/RK7002FD5T116 R823 Q805 NC NC/RK7002FD5T116 CONN R817 NC GATE DR CN802 5 C809 100UF 50V C810 SK310B U801 + E-Pad ON/OFF DIM 29 1 2 3 4 5 6 7 8 9 10 CONN D1 D1 D2 D2 APM8005KCTRG L802NC/22uH +14.5V S1 G1 S2 G2 NC Q803 DR R829 0R05OHM1/8W R826 R830 CN803 1 2 0R05OHM1/8W 3.3R 1/8W 5% R831 1 OHM +-5% 1/8W R822 10K 1/10W CONN NC/MMBT3906 T P V ( Top 絬隔瓜絪腹 Key Component Date 31 Victory Electronics Co . , G4119-P2A-000-0040-2-100826 01.CONVERTER Ltd. ) OEM MODEL e940swa TPV MODEL LNPCA9401AHD1 PCB NAME Sheet 1 715G4119-P2A-000-004C 2 of Size Rev 称爹 Custom B ODM MODEL 6.3 Key Board 2 3 1 715G4014K01000004C LED001 LED 0.1uF 50V 0R01 1/10W R003 R004 2KOHM 1% 1/10W 1K 1/10W SGND SW005 SW OK LBADC2 LBADC1 MENU C002 0.1uF 50V 2KOHM 1% 1/10W R002 AUTO CONN C001 R001 UP LBADC1 LBADC2 DC_POWERON LED_1# LED_2# DOWN 1 2 3 4 5 6 SW004 SW POWER CN001 SW003 SW SW002 SW SW001 SW (2.0K) 1.118V AUTO(0) 0V DOWN(2K) 1.118V MENU(1K) 0.673V SGND (AUTO) (DOWN-) (UP+) (MENU) (Power) LED CONNECTOR OEM MODEL N/A Size 絬隔瓜絪腹 T P V ( Top TBD TPV MODEL e2040V Rev Key Component 2.0.key PCB NAME TBD Sheet 2 Date 32 Victory Electronics Co . , Thursday , Nov ember 05, 2009 Ltd. ) of 2 称爹 B D <称爹> 6.4 Light Sensor Board 715G3995T01000004C VCC R017 NC R014 1K 1/16W 5% 5 + 7 R012 NC/100R 1/16W 5% R015 100K 1/16W 5% 6 - U012B LM358DR R026 NC 3 + 1 IR_TX R011 NC/100R 1/16W 5% 2 - U012A LM358DR 1 VCC_IN VCC_IN R018 33 OHM 1/8W R023 33 OHM 1/8W C015 100N 16V C020 100N 16V VCC_IN 2 R020 1K 1/16W 5% Q012 SST2222A SEN_ON R021 1K 1/16W 5% 1 VCC Q011 MMBT2907AK 3 R019 1K 1/16W 5% NC/UDZSNP5.6B ZD012 1 2 2 R016 100K1/16W 2 LED011 LED NC/UDZSNP5.6B ZD013 1 2 NC/UDZSNP5.6B 1 2 3 4 5 SEN_ON MX_OUTPUT IR_TX VCC R024 10K 1/16W 5% VCC C016 100N 16V CN011 CONN VCC C018 100N 16V U013 R025 100R 1/16W 5% U011 R022 10K 1/16W 5% MX_OUTPUT 1 2 3 4 NC/UDZSNP5.6B ZD011 SEN_ON MX_OUTPUT IR_TX 1 100N 16V ZD014 1 2 8 8 SST2222A 4 + Q013 100uF 16V C013 C011 1uF 16V C012 100N 16V VCC VCC 4 C019 IR_TX R013 4K7 1/16W 5% VCC VDD VSS GP5/T1CKI/P1A*/OSC1/CLKIN GP0/AN0/CIN+/P1B/ICSPDAT GP4/AN3/CIN1-/T1G/P1B*/OSC2/CLKOUT GP1/AN1/CIN0-/VREF/ICSPCLK GP3/T1G*/MCLR/VPP GP2/AN2/T0CKI/INT/COUT/CCP1/P1A 8 7 6 5 C017 100N 16V IR_RX 3 2 IR_RX 1 VCC GND VOUT KSM-603TM2M PIC12F615-I/SN OEM MODEL 40TH Size 絬隔瓜絪腹 T P V ( Top G3995-T01-000-0040-100415 TPV MODEL 40TH Rev Key Component PIC12F615-I/SN PCB NAME Power Sensor Date Victory Electronics Co . , Ltd. ) Sheet Friday , April 16, 2010 33 2 of 2 称爹 A A <称爹> 7. PCB Layout 7.1 Main Board 715G4002M01000004S 34 7.2 Power Board Adapter 715G 901 2 4A 35 Converter 715G4119P01002004C 36 7.3 Key Board 715G3371 2 7.4 Light Sensor Board 715G3995T01000004C 37 8. Maintainability 8.1 Equipments and Tools Requirement 1. Voltmeter. 2. Oscilloscope. 3. Pattern Generator. 4. DDC Tool with an IBM Compatible Computer. 5. Alignment Tool. 6. LCD Color Analyzer. 7. Service Manual. 8. User Manual. 38 8.2 Trouble Shooting 1.No Power No power NG Check power cable is tightened? Re-plug the power cable OK NG Check Power “On/Off” is “On”? Turn on the Power “On/Off” switch OK NG Check the LED indicate is OK? Check the AC power OK Replace the converter board NG Replace main board and check connections NG Replace key board and check connections 39 2. No Video (Power LED Blue) No Video (Power LED Blue) Press the power button is OK? NG Replace the main board OK Replace the converter board OK The end NG Replace the main board and connection OK The end NG Check the LVDS/FFC cable or panel NG Replace the key board 40 OK Replace the LVDS/FFC cable or panel 3. DIM DIM (image overlap, focus or flicker) OK Reset in factory mode The end NG Set to the optimal frequency, select the recommended frequency OK The end NG Readjust the phase and pixel clock in the user mode OK The end NG Pull out signal cable and check “Self Test Feature Check” is ok? OK Check the signal cable and the PC NG NG OK Replace the main board NG Replace the panel OK 41 The end 4. Color is not optimal Color is not optimal Color shift Miss color Reset the factory mode Replace the signal cable NG OK NG In the user mode, set the” color settings” until customer satisfy The end Pull out the signal cable and check the screen color display is normal? NG OK NG Replace the signal cable or PC Replace the main board 42 9. FOS Testing 9.1 Brightness Measurement Max. Brightness>250 cd/㎡(typ). Test conditions: - Center of display - Video input (RGB) = 0,700V for Analog Input - Brightness control is set to max - Contrast control is set to max. Min. brightness measurement: < 45% of Max luminance (max luminance = max contrast + max brightness) Test conditions: - Center of display - Video input (RGB) = 0.700V for Analog Input - Brightness control is set to min. - Contrast control is set to min. 9.2 Patterns Testing Item Waterwave noise Mura LCD bubble Condition (Resolution, Commended test paten) Normal picture 1.1920x1080 (60 Hz) 2. White pattern 1. 1920x1080 (60 Hz) 2. Black pattern or White pattern. 1. 1920x1080 (60 Hz) 2. Black pattern or White pattern 43 Abnormal Picture Cross line Half line H-Line V-Line H-Strip 1. 1920x1080 (60 Hz) 2. Black pattern 1. 1920x1080 (60 Hz) 2. Black pattern or White pattern 1. 1920x1080 (60 Hz) 2. Black pattern, Red pattern, Green pattern or Blue pattern. 1. 1920x1080 (60 Hz) 2. Black pattern or White pattern 1 1920x1080 (60 Hz) 2. Black pattern, Gray scale pattern, Red pattern, Green pattern or blue pattern . 44 V-Strip 1. 1920x1080 (60 Hz) 2. Black pattern, Gray scale pattern, Red pattern, Green pattern or blue pattern . Abnormal display 1. 1920x1080 (60 Hz) 2. Gray scale pattern Gray defect 1. 1920x1080 (60 Hz) 2. Gray scale pattern Video noise 1. 1920x1080 (60 Hz) 2. Gray scale pattern Color tint 1. 1920x1080 (60 Hz) 2. Gray scale pattern 45 Gray scale failure Light leakage Fuzzy video 1. 1920x1080 (60 Hz) 2. Gray scale pattern 1. 1920x1080 (60 Hz) 2. Black pattern or White pattern 1. 1920x1080 (60 Hz) 2. Pane picture 46 10.Firmware and DDC Instruction 10.1Firmware Instruction(TSUM IC ISP for exemple NT68676) Step 1:OPERATION CONDITIONS: 1) An i486 (or above) personal computer or compatible. 2) Microsoft operation system Windows 95/98/2000/XP. 3) ISPTool programs programs. 4) Printer cable and VGA cable. 5) ISP board (PN: 715GT034-B,715GT048-1 or715GT035-A). 6) ISP Firmware/Software Step 2:Connection: 1) LPT cable connect PC and ISP board ; 2) VGA cable connect monitor and ISP board ; 3) Reference picture as below NO1. TPV Part No. : 715GT048-1 or 715GT035-A(715GT048-1 or 715GT035-A) NO2. TPV Part No : 715GT034-B(NEW LCD EDID TOOL :715GT034-B) To PC LPT Port Connect 12V power To Monitor 47 ISP TOOL front side ISP TOOL reverse side Step 3: Programming: 1. Double-click the icon to install Port95nt print driver, 2. Install tool programme 2.1 decompress PS:NT68168F Scale IC must use V4.566 version. 2.2 Double-click 3. ISP Tool 3.1. Choose ”writer” as follow picture. 48 . 3.2.Double-click icon and run it: 4.Click TOOL “Option”, ”FE2P Mode Enable” TOOL show“√” 49 5.Click tool “Option” choose” Setup ISP tool” and then choose LPT Port,the next ,choose NVT Type (default),click “Auto Detect”to choose the appropriate speed。Click”Confirm change”。 6.Click“Load File” to use the proper software: 50 Click“Auto” AUTO Click “Send MX2026 CMD” Click“AUTO”,when appear “pass” as follow picture that burning is successful: 51 Note: After installation, you must restart the PC to take the setup to effect. Step4:Check whether the FW version is correct, then do “Auto Color” and “Reset”. a. For VGA, if can’t use the recommended optimal resolution; for DVI, if no video with PC source, while picture is normal with chroma source, it’s the reason for “DDC Loss”, so pls do DDC programming. b. When the monitor connects the DVD or other play devices with DVI->HDMI cable, and play the HD video with copyright, while the low-resolution, snowflake point or no video with normal audio; But picture is normal with PC source, pls programming the “HDCP code” or replace the new main board. (Pls refer to the “HDCP code” programming as below) Step5:HDCP Write SOP I. Prepare condition: 1. Prepare one PC and the system is WIN98/NT/2000/XP, make sure the PC have Print Port. 2. Install Port95nt Software, the way of the install Port95 (LPT PORT drive): a. selects the software of Port95nt.exe, and run it, b. After install ok, restart the PC. 3. Connect the cable and Jig: a. Use the Print cable to connect the PC and HDCP card. b. Connect the VGA cable with the ISP record card, the picture of Print cable, VGA cable and ISP card as below: DC 12V Connect to PC LPT Connect to Monitor Connect to Signal Source (e.g.: Chroma/PC etc) ISP Tool TPV P/N: 715GT034-B 52 II. HDCP Write Step: Step1. Double click “HDCP20091026.exe” Step2. Click “Load HDCP…”. choose the corresponding “*.BIN” by scaler IC (MST Scaler) ,then click “Open” as below. 53 Step3. Pls choose the item remarked in red (i.e.: New CMD/Only Connect One Monitor/MST Scaler), then click “Start” to write HDCP, when display “Monitor 1 PASS” means Write OK. 54 III. Check HDCP. USE “Blu-Ray Disc” DVD to check whether the monitor with DVI connector displays normally. If error message appeared “ ” as below: 1. Check whether the HDCP writer is correct. 2. Check whether the tool is correct or not, and check the connection between PC, Monitor and tool. In addition, check whether the tool’s power supply is available. 3. If still no work, pls modify the “config.ini” as below, and then try again. Modify Step: Right click “config.ini”-> Open with “Notepad”->”OK”-> Modify the HDCP value (350->500, 150->300, 500->700)->Save. PS: You can also open “config.ini” directly if you have opened it through “Open with ‘Notepad’ ” before. 55 56 350 ->500 150 ->300 500 ->700 57 10.2 DDC Instruction Tool list: 1. DDC board:715GT034-B 2. Software (WA.DAT&WD.DAT&*. CONFIG.INI) 3. LPT driver software 4. LPT cable, D-SUB CABLE ,DVI CABLE and DVI to HDMI CABLE 5. 12V( Adapter) 6. TPVDDCHDMI and TPVDDC6.0 7. PC Tool picture For VGA&DVI BURNING: DDC Board as the follow picture: TO PC LPT DC 12V power VGA LCD DVI port DVI Install software: Note:Burning softsare and EDID data must be put in the same folder as follow picture: 58 VGA&DVI Burning: 1.Double-click the icon “ Double-click ” to install Port95nt print driver, and then restart the computer. , select “Analog and DVI” show as follow picture 2. Click “Load file” and select as follow picture.then click “LCDDDC” EX: DDCModelName:CHIMEI96VS 59 3. Click “ok” show as follow picture. 4.Input same SN twice and date. Click “Pragram” to burn. When appear “pass” as follow picture that burning is successful. 60 5. Click “program”, Note:1. Appear fault as follow , please input SN twice and burning again. 61 Note:2. When appear “pass” as follow picture that burning is successful. Note3:Click “Read both” show as follow picuture..If read SN and model name are same as before inputing as before that burning is successful. 62 Note4:Appear fault as follow, please check the connection of LPT cable , Tool adapter cable and LCD power. Note5:Appear fault as follow,please check the connection of VGA and the connection of DVI 63 Note6: If the burn software is unsuccessfulll, appear fault: 1. For VGA,the resolution will be not the best achieve. 2. For DVI,No picture,no sound. If program failed, in VGA mode, you can’t use the optimal resolution. When Read is OK, program is NG, pls do take following action: 1. For VGA,cut off the 9th pin (connect the monitor). 2. For DVI, cut off the 14th pin (the shortest pin, power supply). 3. Connect the EEPROM WP pin to ground. 64 11. White- Balance, Luminance Adjustment Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment. How to setting MEM channel you can reference to chroma 7120 user guide or simple use “SC” key and “NEXT” Key to modify xyY value and use “ID” key to modify the TEXT description Following is the procedure to do white-balance adjust . 1. Setting the color temp. A. 6500K color Warm color temp. parameter is x=313±30, y=329±30, Y>150cd/ m2(typ) B. 7300K color Normal color temp. parameter is x=302±30 ,y=318±30, Y>150cd/ m2(typ) C. 9300K color Cool color temp. parameter is x=283±30, y=297±30, Y>150cd/ m2(typ) D. sRGB color: sRGB color temp. parameter is x=313±30, y=329±30, Y>150cd/ m2(typ) 2. Enter into the factory mode: Press the MENU button, pull out the power cord, then plug the power cord. Then the factory OSD will be at the left top of the panel. 3. Bias adjustment: Set the Contrast to 50; Adjust the Brightness to 90. 4. Gain adjustment: A. Adjust Warm (6500K) color-temperature 1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button) 2. Switch the MEM.channel to Channel 3 (with up or down arrow on chroma 7120) 3. The LCD-indicator on chroma 7120 will show x=313±30, y=329±30, Y>150cd/ m2(typ) 4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100 5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100 6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100 7. Repeat above procedure (item4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2 B. Adjust Normal (7300K) color-temperature 1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button) 2. Switch the MEM.channel to Channel 4(with up or down arrow on chroma 7120) 3. The LCD-indicator on chroma 7120 will show x=302±30, y=318±30, Y>150cd/ m2(typ) 4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100 5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100 6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100 7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2 65 C. Adjust Cool (9300K) color-temperature 1. Switch the Chroma-7120 to RGB-Mode (with press “MODE” button) 2. Switch the MEM. Channel to Channel 9 (with up or down arrow on chroma 7120) 3. The LCD-indicator on chroma 7120 will show x=283±30, y=297±30, Y>150cd/ m2(typ) 4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100 5. Adjust the GREEN on factory window until chroma 7120 indicator reached the value G=100 6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100 7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2 D. Adjust sRGB color-temperature 1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button) 2. Switch the MEM.channel to Channel 10 (with up or down arrow on chroma 7120) 3. The LCD-indicator on chroma 7120 will show x=313±30, y=329±30, Y>150cd/ m2(typ) 4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100 5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100 6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100 7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2 E. Turn the Power-button off to quit from factory mode. 66 12. Mechanical Instructions 1. Put monitor on the EPE cushion 2. Put monitor front side upwards and top side face to yourself. 67 3.Open the top side of front bezel with fingers. 4. Open whole front bezel with a special disassembly tool. 68 5.Put panel side downwards and take off back cover 6.Remove lamp cable\ aluminum foil\KEPC\ e-SENSOR BOARD\ hexagonal screws. 69 7.Turn over main frame and remove screws 70 8.Judge the failure position ,disassemble CNPC or CBPC or e-SENSOR BOARD or KEPC and repair 71 13.Monitor Exploded View 72 14. BOM List Note: The parts information listed below are for reference only, and are subject to change without notice. Please go to http://cs.tpv.com.cn/hello1.asp for the latest information. TDAGNT2EWWA4HNE Location HDCP-L E09504 E09501 E09501 E09503 E09503 E09502 E09502 E09505 E09505 E750 E09504 Part No. 040G 581 26704 040G 58162435A 052G 1150 C 052G 1186 052G 1211 B 052G 2191 A 070GHDCP500HDC 095G176J 6E03 095G8018 3DE36 095G8018 3TE36 095G8022 5DE01 095G8022 5TE01 095G8022 7TE01 095G8022 7WE01 095G802210TE01 095G802210WE01 0D1G1030 8120 705GHA34030 705GHA34059 750GBG230F3B13N000 A34G2365DAVA1M0130 H01G6009 1 H15G0035501101 H33G0022 1 1L H33G0023AED 1B H40G 58361512A H40G 58361513A H40G 58461523A H41G780961522A H44GD009101 H44GD009201 H44GD009615 1A H45G 77 6 H45G 87 1 20 H45G 87 1810H A H52G6025 16 58 H70G201061546A Q45G 76 28 H A Q50G 4 10 Q52G 1185 99 Q52G6019 14 S95G176T6E03 705GHA34030 0Q1G 130 8120 A34G1867DAV 1M0130 H15G0042101 705GHA34059 0M1G1740 10120 0Q1G 140 8120 Description SHIPPING LABEL P/N LABEL FOR MANUAL PE BAG INSULATING TAPE SMALL TAPE Conductive Tape 85mm *40mm *0.09mm PAPER TAPE NO-SUGGEST HDCP CODE FFC CABLE 6P 308 1.0 HARNESS 30P-30P 330MM HARNESS 30P-30P 330MM HARNESS 5P(A1253)-5P(A1253) 260MM HARNESS 5P(A1253)-5P(A1253) 260MM HARNESS 7P(1253)-6P(1253) 130 HARNESS 7P-6P 130MM HARNESS 10P(A1253)-10P(A1253) 90 HARNESS 10P(A1253)-10P(A1253) 90MM screw 2440 BASE ASS'Y i2340v REAR COVER_STAND ASS'Y PANEL LM230WF3-SLB1 GZ LGD BEZEL FOR i2340 Screw MAIN FRAME FOR i2340 LENS_AOC_L201WA-2040LED KEY PAD_AOC_L201WA-2040LED esensor LABEL win7 EPEAT EPA LABEL I2340Ve POP LABEL e2040v QSG PULP PULP I2340Ve CARTON PE PACKING EPE COVER EPE COVER FOR BASE mylar I2340Ve CD MANUAL PE BAG FOR MANUAL TIE (Y1900221) big carton tape for aoc TAPE FFC CABLE 6PIN P1.0MM 308MM 2440 BASE ASS'Y SCREW 42A9930011 BASE FOR 2440 BASE BRACKET i2340v REAR COVER_STAND ASS'Y SCREW 42A9940008 SCREW T4X8 73 Remark 2nd source 2nd source 2nd source 2nd source 2nd source SMTCA-U402 E08903 E08903 E08903 E08901 C718 C716 FB702 CN701 CN101 CN102 X401 CN402 CN401 CN702 U401 U704 U705 U702 U103 U104 U105 U106 U107 U102 U101 U402 Q401 Q402 Q302 Q701 Q301 R406 R408 R427 R115 R111 R105 R134 R132 A34G1865DBA 1B0100 A34G1866DBA 1B0100 A34G2366DAV 1M0100 A37G0164012 756GHACB A1073 100GANGD000W11 808GI2340VETPE 089G1745CAA 9 089G1745GAA 9 089G1745HAA 9 089G420A15N IS H26G 800504 2B H40G 24N61538A H40G 58261572A H40G 58461536A H41G780961540A CBPC9NRA1H5 040G 45762412B 067G204V181 3K 067G204V471 2K 071G 5526A H 088G 304 11 C 088G 35315FVCL 088G 35424F VC 093G 2251B J Q55G 23524 Q55G 100625 033G8032 5F HR 033G8032 7F HR 033G803210F HR 056G 562328 056G 563113 056G 563215 056G 563512 056G 662502 056G 662502 056G 662502 056G 662502 056G 662502 056G1133 34 056G1133 34 056G2233 11 057G 417517 057G 417517 057G 417518 057G 417518 057G 763940 061G0402000 JY 061G0402000 JY 061G0402000 JY 061G0402100 JY 061G0402100 JY 061G0402100 JY 061G0402100 JY 061G0402100 JY STAND STAND REAR COVER FOR i2340 HINGE_ASS¡¯Y MAIN BOARD-CBPC9NRA1H5 MCU ASS'Y-056G2233 11 I2340VE Chinese Taipei ASS'Y DVI CABLE 1500 DVI CABLE DVI CABLE 1.5M AC POWER CORD 1500MM TAIWAN barcode I2340VE TW ID LABEL AOC TW WARRANTY LABEL I2340VE TW CARTON LABEL TW WARRANTY BOOKLIST MAIN BOARD CBPC LABEL CS CAP 180uF 16V 8*8 mm CS CAP 470uF 10V 8*8 mm CORE 6.0X3.5X3.5 127 25% 3.5X6.0 DC POWER JACK 3P 2.5mm D-SUB CONN 15P V/T 10.5mm WITH SCREW DVI CONN 24P V/T WITH SCREW CRYSTAL 12MHZ NXS12.000AC30F-KAB10 WELDING FLUX WITHOUT PB TIN STICK_LOW ARGENTUM CONNECTOR CONNECTOR CONNECTOR 10P 1.25 IC Scaler NT68668AUFG QFP-128 IC G1117-18T63Uf 1A/1.8V SOT-223 IC DC/DC MP1584EN SOIC8E IC G1117-33T43UF 1A/3.3V TO-252 IC ESD AZC199-04S.R7G SOT23-6L IC ESD AZC199-04S.R7G SOT23-6L IC ESD AZC199-04S.R7G SOT23-6L IC ESD AZC199-04S.R7G SOT23-6L IC ESD AZC199-04S.R7G SOT23-6L M24C02-WMN6TP M24C02-WMN6TP IC Pm25LD020C-SCE SIOC-8(150mil) 2M Tra LMBT3906LT1G -200mA/-40V SOT-23 LRC Tra LMBT3906LT1G -200mA/-40V SOT-23 LRC TRA LMBT3904LT1G 200mA/40V SOT-23 LRC TRA LMBT3904LT1G 200mA/40V SOT-23 LRC MOSFET AO3401A SOT-23 NO-SUGGEST RST CHIPR MAX 0R05 OHM 1/16W NO-SUGGEST RST CHIPR MAX 0R05 OHM 1/16W NO-SUGGEST RST CHIPR MAX 0R05 OHM 1/16W NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y 74 2nd source 2nd source R131 R130 R129 R128 R127 R126 R706 R435 R420 R419 R401 R119 R118 R113 R104 R103 R101 R437 R436 R426 R413 R412 R705 R703 R702 R418 R417 R403 R402 R305 R120 R726 R712 R415 R306 R135 R434 R714 R106 R107 R704 R304 R136 R123 R139 R416 R727 R711 R433 R432 R431 R133 R109 R114 R117 061G0402100 JY 061G0402100 JY 061G0402100 JY 061G0402100 JY 061G0402100 JY 061G0402100 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402101 JY 061G0402102 JY 061G0402102 JY 061G0402102 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402103 JY 061G0402104 JY 061G0402104 JY 061G0402104 JY 061G0402104 JY 061G0402104 JY 061G0402105 JY 061G04021301FY 061G0402222 JY 061G0402222 JY 061G0402223 JY 061G0402223 JY 061G0402223 JY 061G0402223 JY 061G0402224 JY 061G0402224 JY 061G0402304 JF 061G0402333 JY 061G04023901FY 061G04023901FY 061G04023901FY 061G0402394 JY 061G0402470 JY 061G0402470 JY 061G0402470 JY NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10 OHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y RST CHIPR 100KOHM +-5% 1/16W YAGEO RST CHIPR 100KOHM +-5% 1/16W YAGEO RST CHIPR 100KOHM +-5% 1/16W YAGEO RST CHIPR 100KOHM +-5% 1/16W YAGEO RST CHIPR 100KOHM +-5% 1/16W YAGEO RST CHIPR 1000KOHM 1/16W YAGEO RST CHIPR 1K3 +-1% 1/16W YAGEO RST CHIPR 2.2KOHM +-5% 1/16W YAGEO RST CHIPR 2.2KOHM +-5% 1/16W YAGEO RST CHIPR 22KOHM +-5% 1/16W YAGEO RST CHIPR 22KOHM +-5% 1/16W YAGEO RST CHIPR 22KOHM +-5% 1/16W YAGEO RST CHIPR 22KOHM +-5% 1/16W YAGEO RST CHIPR 220KOHM +-5% 1/16W YAGEO RST CHIPR 220KOHM +-5% 1/16W YAGEO RST 0402 300K 5% 1/16W FENGHUA RST CHIPR 33KOHM £«-5£¥ 1/16W YAGEO RST CHIP 3.9KOHM 1% YAGEO RST CHIP 3.9KOHM 1% YAGEO RST CHIP 3.9KOHM 1% YAGEO RST CHIP R 390K +/-5% 1/16W YAGEO NO-SUGGEST RST CHIPR 47 OHM 5% 1/16W YAG NO-SUGGEST RST CHIPR 47 OHM 5% 1/16W YAG NO-SUGGEST RST CHIPR 47 OHM 5% 1/16W YAG 75 R414 R110 R422 R411 R410 R303 R138 R137 R125 R124 R713 R108 R112 R116 R707 R102 FB703 FB103 FB102 FB101 R404 R405 FB401 R302 R301 C107 C118 C119 C714 C422 C425 C427 C431 C432 C433 C434 C435 C437 C438 C702 C705 C706 C708 C709 C713 C717 C720 C112 C115 C120 C121 C122 C124 C125 C126 061G04024700FY 061G0402471 JY 061G0402472 JY 061G0402472 JY 061G0402472 JY 061G0402472 JY 061G0402472 JY 061G0402472 JY 061G0402472 JY 061G0402472 JY 061G04026801FY 061G0402750 JY 061G0402750 JY 061G0402750 JY 061G0603000 JF 061G0603000 JF 061G0603000 JF 061G0603000 JF 061G0603000 JF 061G0603000 JF 061G0603221 JF 061G0603331 JF 061G0805000 JF 061G1206221 JF 061G1206221 JF 065G040210232K 065G040210232K 065G040210232K 065G040210232K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K A A A A Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y RST CHIP 470R 1/16W 1% RST CHIPR 470OHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIP 6K8 1/16W 1% NO-SUGGEST RST CHIPR 75OHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 75OHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 75OHM +-5% 1/16W YA RST CHIPR MAX 0R05 1/10W FENGHUA RST CHIPR MAX 0R05 1/10W FENGHUA RST CHIPR MAX 0R05 1/10W FENGHUA RST CHIPR MAX 0R05 1/10W FENGHUA RST CHIPR MAX 0R05 1/10W FENGHUA RST CHIPR MAX 0R05 1/10W FENGHUA ST CHIPR 220 OHM +-5% 1/10W FENGHUA RST CHIPR 330OHM +-5% 0603 RST CHIPR 0 OHM +-5% 1/8W FENGHUA RST CHIPR 220 OHM +-5% 1/4W FENGHUA RST CHIPR 220 OHM +-5% 1/4W FENGHUA CAP 0402 1NF K 50V X7R CAP 0402 1NF K 50V X7R CAP 0402 1NF K 50V X7R CAP 0402 1NF K 50V X7R CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% 76 C301 C419 C418 C417 C407 C405 C403 C402 C401 C304 C712 C719 C722 C103 C104 C429 C303 C117 C116 C428 C426 C114 C111 C110 C108 C106 C102 C105 C109 C113 C715 C710 C305 C408 C414 C415 C424 C439 C423 C421 C416 C413 C406 C404 C721 C723 C302 C704 C707 FB301 FB407 FB405 FB404 FB403 FB402 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210412K 065G040210427Z 065G040210427Z 065G040215131J 065G040222031J 065G040222031J 065G040222417Z 065G040222417Z 065G040222417Z 065G040222417Z 065G040227031J 065G040227031J 065G040247312K 065G040247312K 065G040247312K 065G040247312K 065G040247312K 065G040247312K 065G040250931J 065G040250931J 065G040250931J 065G060310232K 065G060310232K 065G060310512K 065G060310512K 065G060310512K 065G060310512K 065G060310512K 065G0805475A2K 065G0805475A2K 065G0805475A2K 065G0805475A2K 065G0805475A2K 065G0805475A2K 065G0805475A2K 065G120610625K 065G120610625K 065G120622617Z 065G120622617Z 065G120622617Z 071G 56K121 M 071G 56V301 B 071G 56V301 B 071G 56V301 B 071G 56V301 B 071G 56V301 B Y Y Y Y Y Y Y Y Y Y T T Y A A A A A A A A A A A A A A A A A F F A A A A A Y Y Y Y Y Y Y Y Y Y Y Y CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% NO-SUGGEST 0402 0.1UF 25V Y5V NO-SUGGEST 0402 0.1UF 25V Y5V CHIP 150pF 50V NPO YAGEO CAP 0402 22PF J 50V NPO CAP 0402 22PF J 50V NPO NO-SUGGEST CAP CHIP 0402 220nF Z 16V Y5V NO-SUGGEST CAP CHIP 0402 220nF Z 16V Y5V NO-SUGGEST CAP CHIP 0402 220nF Z 16V Y5V NO-SUGGEST CAP CHIP 0402 220nF Z 16V Y5V CAP 0402 27PF 50V NPO CAP 0402 27PF 50V NPO 8.31HIP 0402 47nF K 16V X7R 8.31HIP 0402 47nF K 16V X7R 8.31HIP 0402 47nF K 16V X7R 8.31HIP 0402 47nF K 16V X7R 8.31HIP 0402 47nF K 16V X7R 8.31HIP 0402 47nF K 16V X7R CAP 0402 5PF J 50 NPO CAP 0402 5PF J 50 NPO CAP 0402 5PF J 50 NPO CAP CHIP 0603 1NF K 50V X7R CAP CHIP 0603 1NF K 50V X7R CAP 0603 1UF 10% 16V X7R CAP 0603 1UF 10% 16V X7R CAP 0603 1UF 10% 16V X7R CAP 0603 1UF 10% 16V X7R CAP 0603 1UF 10% 16V X7R CAP CHIP 0805 4.7UF K 10V X7R CAP CHIP 0805 4.7UF K 10V X7R CAP CHIP 0805 4.7UF K 10V X7R CAP CHIP 0805 4.7UF K 10V X7R CAP CHIP 0805 4.7UF K 10V X7R CAP CHIP 0805 4.7UF K 10V X7R CAP CHIP 0805 4.7UF K 10V X7R CAP CHIP 1206 10uF K 25V X5R CAP CHIP 1206 10uF K 25V X5R NO-SUGGEST CHIP 1206 22UF Z 16V Y5V NO-SUGGEST CHIP 1206 22UF Z 16V Y5V NO-SUGGEST CHIP 1206 22UF Z 16V Y5V CHIP BEAD 120OHM 6A MGLB2012-120T-LF CHIP BEAD 0805 300OHM BULLWILL CHIP BEAD 0805 300OHM BULLWILL CHIP BEAD 0805 300OHM BULLWILL CHIP BEAD 0805 300OHM BULLWILL CHIP BEAD 0805 300OHM BULLWILL 77 FB104 FB105 FB106 L701 D101 D102 ZD101 D708 D707 D704 D701 D703 CN301 E080 IC903 NR901 C903 C925 C902 C901 C909 C919 C921 C904 D901 D902 D904 Q901 L902 L901 T901 LED2 CN901 D902 D901 GND1 GND2 GND4 GND3 071G 59G301 071G 59G301 071G 59G301 073G253S521 H 093G 64 42 L 093G 64 42 L 093G 39GA01 T 093G3004 3 093G3004 3 093G3004 3 093G3004 3 093G3004 3 311GW125A30ACH 715G4002M01000004S ADPCA1248HD1 040G 154501 1 040G 45762412B 045G 88525 E 052G 1211 A 056G 139 3A 061G 58901 WT 063G107K474 6S 065G 1K103 2E6921 065G305M1022EP 065G305M1022EP 065G306M3322BP 067G215C6814RV 067G215C6814RV 067G215Y10115L 071G 55 30 071G 55 30 071G 55 30 071G 55 30 073G 253191 H 073L 174 40H1G 080GL19T507 N 081G 2 3 1P 087G 50132A DL 089G 171535 G 093G 5212T52T 093G 5212T52T 705GHA93004 705GQA57011 709G 901 HM001 715G 901 2 4A6437 H33G0024 1 1C H33G0025 GM T 18 H33G0026 GM T 18 Q09G6014 1 Q09G6014 1 Q09G6014 1 Q09G6014 1 Q40G000162429A Q40G000362427A Q40G375B690 1A CHIP BEAD 300OHM CHIP BEAD 300OHM CHIP BEAD 300OHM SMD CHOKE 22UH 20% 3.3A HF DIODE LBAV70LT1G SOT-23 LRC DIODE LBAV70LT1G SOT-23 LRC RLZ5.6B SM340A SM340A SM340A SM340A SM340A WAFER 1.25mm 30P MAIN BOARD PCB ADAPTER BOARD HI-POT GND LABEL CBPC LABEL PE BAG Tasma aluminiowa PC123Y22FZOF SHARP NTC 1R 15% SCK10015LSY001 BY THINKING 0.47UF +-10% CAP CER 10NF K 1KV Y5U CAP Y2 1000PF M 250VAC CAP Y2 1000PF M 250VAC Y1 CAP 3300PF M 250VAC EC ZLH 680UF 25V 10*16 EC ZLH 680UF 25V 10*16 EC 100UF 20% 450V 18*35.5 FERRITE BEAD 4.0*2*3 FERRITE BEAD 4.0*2*3 FERRITE BEAD 4.0*2*3 FERRITE BEAD 4.0*2*3 IND CHOKE 1.1uH DADON LINE FILTER 30.0mH MIN X'FMR 2.0MH 5% 25UH MAX LED GPG2603T/R006-35A GUANGPU AC SOCKET 3PIN DC POWER CORD 1000MM DIODE 1N4007-AO DO-41 DIODE 1N4007-AO DO-41 D904 ASS'Y Q901 ASS'Y CONSUMPTIVE ASS'Y ADAPTER BOARD PCB LENS BOTTOM COVER_ADAPTER TOP COVER_ADAPTER PIN PIN PIN PIN LABEL LABEL LABEL 78 BD901 D904 HS1 Q901 HS2 E55 IC901 R968 C908 R986 R909 R916 R920 R910 R921 R907 R967 R922 R914 R906 R908 R917 R904 R923 R913 R912 R918 R903 R902 R901 R919 C911 C922 C923 C915 C912 C914 C916 C920 T901 CN901 L901 IC904 R911 C926 C906 F901 J901 Q52G 1205106 093G 50460900 005G 42 1 012G 372 1 093G 60310 0M1G 930 6120 Q90G0171 1 057G 667924 0M1G 930 6120 Q90G0168 1 055G 23524 Q51G 6 4509 Q55G 100625 056G 379530 061G0603222 JT 061G0805104 JT 061G0805203 JT 061G0805221 JT 061G08052491FT 061G1206100 JT 061G1206103 JT 061G1206105 JF 061G1206229 JT 061G1206434 JF 061G1206434 JF 061G1206434 JF 061G1206434 JF 061G1206470 JT 061G1206472 JT 061G1206473 JT 061G1206510 JT 061G1206510 JT 061G1206510 JT 061G12065100FT 061G1206684 JT 061G1206684 JT 061G1206684 JT 061G12069761FT 065G080510332K F 065G080510432K A 065G080510522K T 065G080522332K F 065G080533131J F 065G120622272K Y 065G120622272K Y 065G120647522K T 006G 31 4 006G 31500 006G 31502 056G 158 10 T 061G152M62852T SY 065G 2K222 2T6921 067G 2154707NT 084G 56 4W 095G 90 23 CU FOIL BRIDGE 4A/800V GBU408 LITEON CUSHION SILICONE RUBBER DIODE V30100C-E3/4W 30A/100V TO-220AB screw heat sink MOSFET SMK0965F screw HEAT SINK WELDING FLUX WITHOUT PB GLUE_RTV TIN STICK_LOW ARGENTUM AC/DC CONVERTER LD7750GS SOP-8 RST CHIP 2K2 1/10W 5% TZAI YUAN RST CHIPR 100KOHM +- 5% 1/8W TZAI YUAN RST CHIPR 20K +-5% 1/8W TZAI YUAN RST CHIP 220R 1/8W 5% TZAI YUAN RST CHIP 2K49 1/8W 1% RST CHIPR 10 OHM +-5% 1/4W TZAI YUAN RST CHIPR 10KOHM +-5% 1/4W TZAI YUAN RST CHIPR 1 MOHM +-5% 1/4W FENGHUA RST CHIPR 2R2 +-5% 1/4W TZAI YUAN RST CHIPR 430KOHM +-5% 1/4W FENGHUA RST CHIPR 430KOHM +-5% 1/4W FENGHUA RST CHIPR 430KOHM +-5% 1/4W FENGHUA RST CHIPR 430KOHM +-5% 1/4W FENGHUA RST CHIPR 47 OHM +-5% 1/4W TZAI YUAN RST CHIP R 4K7 1/4W +/-5% RST CHIPR 47 KOHM +-5% 1/4W TZAI YUAN RST CHIPR 51 OHM +-5% 1/4W TZAI YUAN RST CHIPR 51 OHM +-5% 1/4W TZAI YUAN RST CHIPR 51 OHM +-5% 1/4W TZAI YUAN RST CHIPR 510R 1/4W +-1% TZAI YUAN RST CHIPR 680 KOHM +-5% 1/4W TZAI YUAN RST CHIPR 680 KOHM +-5% 1/4W TZAI YUAN RST CHIPR 680 KOHM +-5% 1/4W TZAI YUAN RST CHIPR 9.76 KOHM +-1% 1/4W TZAI YUAN CAP 0805 10NF K 50V X7R CAP CHIP 0805 0.1UF K 50V X7R CAP 0805 1UF 10% 25V X7R CAP 0805 22NF K 50V X7R CAP CHIP 0805 330PF J 50V NPO CER 1206 2N2 500V X7R 10% CER 1206 2N2 500V X7R 10% CAP CHIP 1206 4.7uF K 25V X7R 1.7MM RIVET EYELET 1.5MM RIVET LDO IC AZ431AZ-AE1 TO-92 150MA 40V TO-92 RST MOFR 0.62 OHM +-5% 2WS CAP CER 2200PF K 2KV Y5P KY50VB47M-TP5 6.3*11 FUSE 4A 250V JUMPER WIRE 79 J902 J903 SW001 SW002 SW003 SW004 SW005 CN001 R002 R004 R003 R001 C002 C001 LED001 E715 E715 C807 C809 CN803 CN801 U801 Q806 R832 R833 R819 R806 R808 R822 R804 R807 R810 R803 R802 R809 R826 R838 R837 R836 R835 R815 R805 R818 R812 R813 R801 C806 C802 C805 095G 90 23 095G 90 23 709G 901 HA001 715G 901 2 156403 KEPC9HC2 077G603S AI HJ 077G603S AI HJ 077G603S AI HJ 077G603S AI HJ 077G603S AI HJ 033G8032 6F HR 061G0603000 FF 061G06031001FF 061G06032001FF 061G06032001FF 065G060310432K A 065G060310432K A 081G 14 12 GP 715G4014K01000004C 715G4014K01000004S LNPCAD481GHD1 040G 45762412B 067G215C4799KV 067G215P1017KV 709G3823 HM001 033G8019 6K H JS 033G803210F HR 056G 700 5 057G 763947 061G0603000 JT 061G0603000 JT 061G06031002FT 061G0603102 JF 061G0603102 JF 061G0603103 JF 061G0603104 JF 061G0603104 JF 061G0603104 JF 061G06032402FT 061G06033003FF 061G06036801FF 061G0805000 JF 061G0805109 JT 061G0805109 JT 061G0805109 JT 061G0805109 JT 061G0805109 JY 061G0805304 JY 061G1206000 JF 061G12061007FF 061G12061007FF 061G12061009FT 065G060310131J F 065G060368332K F 065G080522141J Y JUMPER WIRE JUMPER WIRE CONSUMPTIVE ASS'Y ADAPTER BOARD PCB KEY BOARD TACT SWITCH AI 2PIN SEALED TACT SWITCH AI 2PIN SEALED TACT SWITCH AI 2PIN SEALED TACT SWITCH AI 2PIN SEALED TACT SWITCH AI 2PIN SEALED CONNECTOR 6P 1.25 RST CHIPR MAX0R01 1/10W FENGHUA RST CHIPR 1 KOHM +-1% 1/10W FENGHUA RST CHIP 2KOHM 1% 1/10W FENGHUA RST CHIP 2KOHM 1% 1/10W FENGHUA CAP CHIP 0603 100nF K 50V X7R CAP CHIP 0603 100nF K 50V X7R CHIP LED GPTD1210YBC5-D KEY BOARD PCB KEY BOARD PCB CONVERTER BOARD CBPC LABEL EC 4.7UF 20% 100V EM 8*9 EC 100UF 20% 50V 10X9 COMSUPTIVE ASS'Y FPC CONN 1.0mm 6P CONNECTOR 10P 1.25 IC LED driver MP3389EF TSSOP28 MOSFET APM8005KCTRG SOP-8 RST CHIP MAX 0R05 1/10W TZAI YUAN RST CHIP MAX 0R05 1/10W TZAI YUAN RST CHIP 10K 1/10W 1% RST CHIPR 1K OHM +-5% 1/10W FENGHUA RST CHIPR 1K OHM +-5% 1/10W FENGHUA RST CHIPR 10K OHM +-5% 1/10W FENGHUA RST CHIPR 100KOHM 5% 1/10W FENGHUA RST CHIPR 100KOHM 5% 1/10W FENGHUA RST CHIPR 100KOHM 5% 1/10W FENGHUA RST CHIPR 24K +-1% 1/10W TZAI YUAN RST CHIPR 300KOHM 1/10W FENGHUA RST CHIPR 6.8KOHM +-1% 1/10W FENGHUA RST CHIPR 0 OHM +-5% 1/8W FENGHUA RST CHIP 1R 1/8W 5% TZAI YUAN RST CHIP 1R 1/8W 5% TZAI YUAN RST CHIP 1R 1/8W 5% TZAI YUAN RST CHIP 1R 1/8W 5% TZAI YUAN RST CHIP 1R 1/8W 5% YAGEO RST CHIPR 300K +-5% 1/8W YAGEO RST CHIPR MAX0R05 1/4W FENGHUA RST 1206 0.1R 1% 1/4W RST 1206 0.1R 1% 1/4W RST CHIP R 10ohm 1/4W +/-1% CAP CHIP 0603 100PF J 50V NPO CAP CHIP 0603 68NF K 50V X7R CAP CHIP 0805 220P 100V NP0 +/-5% 80 2nd source C804 C803 C801 L801 D801 U013 C019 LED011 U012 U011 Q011 Q012 Q013 R025 R027 R021 R020 R019 R014 R022 R024 R015 R016 R013 R023 R018 C012 C013 C015 C016 C017 C018 C020 C011 E715 CN011 E715 065G080547332K Y 065G080547332K Y 065G080547422K Y 073G253S 19 H 093G 60S907 T 715G4119P01002004C LSPC9HC2 056G 627911 067G305M1013KV 081G IR 7 GP H12G6200 13 056G 192 25 056G1125200 057G 417 16 T 057G 761 18 T 057G 761 18 T 061G0402101 JY 061G0402102 JY 061G0402102 JY 061G0402102 JY 061G0402102 JY 061G0402102 JY 061G0402103 JY 061G0402103 JY 061G0402104 JY 061G0402104 JY 061G0402472 JY 061G0805330 JT 061G0805330 JT 065G040210412K Y 065G040210412K Y 065G040210412K Y 065G040210412K Y 065G040210412K Y 065G040210412K Y 065G040210412K Y 065G060310517Z Y 715G3995T01000004C 033G8032 5F HR 715G3995T01000004S CAP CHIP 0805 47N 50V X7R +/-10% CAP CHIP 0805 47N 50V X7R +/-10% CAP CHIP 0805 0.47UF K 25V X7R SMD CHOKE 33uH+-20% 3A SCHOTTKY B3100B 3A 100V SMB CONVERTER BOARD PCB LIGHT SENSOR BOARD IR 38KHZ KSM-603TM2M 105 摄氏度 100UF +-20% 16V IR LED GP1303T12A/940-2-35 RUBBER D-AMP AS358MTR-E1 SOIC-8 IC MCU PIC12F615-I/SN SOIC-8 MMBT2907 TEST ONLY SST2222A 0.4 60 SMT3 TEST ONLY SST2222A 0.4 60 SMT3 NO-SUGGEST RST CHIPR 100 OHM +-5% 1/16W NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 1KOHM +-5% 1/16W YA NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y NO-SUGGEST RST CHIPR 10KOHM +-5% 1/16W Y RST CHIPR 100KOHM +-5% 1/16W YAGEO RST CHIPR 100KOHM +-5% 1/16W YAGEO RST CHIPR 4.7KOHM +-5% 1/16W YAGEO RST CHIP 33R 1/8W 5% TZAI YUAN RST CHIP 33R 1/8W 5% TZAI YUAN CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP CHIP 0402 100N 16V X7R +/-10% CAP 0603 1UF -20%+80% 16V Y5V IR BOARD PCB CONNECTOR IR BOARD PCB 81 2nd source