Download DAQ BNC-2090 User manual

Transcript
Chapter 3
Signal Conditioning Application Examples
DAC0OUT
R17 = 39.8 kΩ
DAC0OUT
BNC Connector
C9 = 1 µf
AGND
Figure 3-9. Lowpass Filter on DAC0OUT
Building Highpass Filters
Building highpass filters for analog output is the same as for analog
input. Refer to Analog Input for more detailed information about
highpass filters and how to calculate values for them. Refer to
Figure 3-1 for component locations. Figure 3-10 shows a 50 kHz
highpass filter for DAC0OUT.
DAC0OUT
R17 = .0005 µf
DAC0OUT
BNC Connector
C9 = 6.34 kΩ
AGND
Figure 3-10. Highpass Filter on DAC0OUT
BNC-2090 User Manual
3-12
 National Instruments Corporation