Download Compex Advanced SerialRAID Adapters SA33-3285-02 Specifications

Problem Determination-Generated Error Codes
Attention: If you replace FRUs or perform an action and the problem is still not
corrected, go to “MAP 1540: Minimum Configuration” on page 52 unless otherwise
indicated in the tables.
If you replace FRUs or perform an action and the problem is corrected, go to ″MAP
410: Repair Checkout″ in Diagnostic Information for Multiple Bus Systems.
Note: Do not shut down the system if the FRU was replaced by hot swap.
Table 11. Problem Determination Generated Error Codes
Error Code
Description
Action/ Possible Failing FRU
M0BT 0000
The system hung during speaker
Go to “MAP 1540: Minimum
POST. This error code is generated
Configuration” on page 52.
by the customer performing “Problem
Determination” in the 26F/80, 256/F0,
and 256/F1 User’s Guide.
M0BT 0001
The system hung during “Starting
Software...”. This error code is
generated by the customer
performing “Problem Determination”
in the 26F/80, 256/F0, and 256/F1
User’s Guide.
M0KB D000
The system hung during keyboard
Keyboard
POST. This error code is generated
by the customer performing “Problem
Determination” in the 26F/80, 256/F0,
and 256/F1 User’s Guide.
M0KB D001
The system did not respond to a
keyboard entry. This error code is
generated by the customer
performing “Problem Determination”
in the 26F/80, 256/F0, and 256/F1
User’s Guide.
Type 101 keyboard.
M0KB D002
The system did not respond to a
keyboard entry. This error code is
generated by the customer
performing “Problem Determination”
in the 26F/80, 256/F0, and 256/F1
User’s Guide.
Type 102 keyboard.
M0KB D003
The system did not respond to a
keyboard entry. This error code is
generated by the customer
performing “Problem Determination”
in the 26F/80, 256/F0, and 256/F1
User’s Guide.
Kanji-type keyboard.
Go to “MAP 1540: Minimum
Configuration” on page 52.
Chapter 5. Error Code to FRU Index
241