Download Drawmer SIX-PACK Specifications
Transcript
SIX-PACK” OPERATORS’ MANUAL 7 LINKING Link: Pressing the link switch on any channel causes it to be linked to and completely controlled from, the previous channel (to the left). Therefore, pressing link on channel 2, will link channels 1 and 2, with channel 1 being the master channel. In addition, pressing link on channels 2 and 3 will link channels 1,2 and 3 with channel 1 being the master. All channels show Master or Linked status. Channel 1 is always a master channel. The following diagram shows the more commonly used linking configurations: