Download Miele PW 6101 Programming instructions

Programming
12. Dispensing phase 1
14. Agitation from level
This option is used for specifying the
dispensing procedure for a max. of 6
dispenser pumps.
This defines drum agitation in the
programme block after the first water intake.
Selection choice:
– No
Selection choice:
– Automatic
– User defined
Dispensing does not take place.
– User defined
Dispenser pumps
1 dispenser pump per dispensing
can be selected from D1 to D 13
Dispensing amount (depending on
dispensing method selected)
0 to 999 ml or
0 to 50 ml/l or
0 to 50 ml/kg
Dispensing delay
0 to 999 sec.
– X with dispensing type set to "No"
Time
0, 15 to 59 sec
0 to 99 min.
Rhythm
No
Normal 12/3 sec. Wash/Pause
Gentle
5/10 sec. Wash/Pause
Gentle+ 3/27 sec. Wash/Pause
User defined
On: 2 to 99 sec.
Off: 2 to 99 sec.
rpm
No
Normal
Drench
User defined 20 to 70 rpm.
13. Dispensing stop 1
Selection choice:
– No
The dispensing process takes place at the
same time as the following programme
steps. Dispensing stops at the end of wash
time 1.
– Yes
Start drum rotation
Auto load adjustment
0 mm to level 1
Water level
0 mm to level 1
Water volume
0 l to level 1
Laundry to suds ratio
1:0 to 1:20 kg/l
Long dispensing phases are not stopped.
The subsequent wash time 1 will not start
until the dispensing procedure is complete.
– X with dispensing type set to "No"
24
M.-Nr. 06 533 430