Download DR POWERWAGON-PRO Operating instructions
Transcript
Dumping - Manually NOTE: For safety reasons, the DR POWERWAGON-PRO Bed is designed NOT to dump automatically once you release the Dump Lever. You must pull the Dump Handle back then lift the back of the Bed to cause it to tip forward. Dump Lever Handle 1. Remove the Front Panel. 2. Stand at the rear of the Bed. 3. Pull the Handle on the Dump Lever (Figure 9), and then pull up on the rear of the Bed to dump the load (Figure 10). 4. After unloading, push the Bed back down into place by hand. Be sure the Dump Lever latches securely. NOTE: The Bed of the DR POWERWAGON-PRO is balanced so you can dump the load with minimal effort. If you are carrying a very heavy load, you may not be able to lift the Bed to dump it when you release the Latch Lever. In this case, you will need to manually remove part of the load from the back of the Bed, until the load is light enough to allow the Bed to tip forward when you lift up on the back of it. Figure 9 Figure 10 16 DR® POWERWAGON-PRO