Download Cisco 15216 EDFA2 Specifications

Chapter 9
TL1 Commands
9.6 TL1 Commands and Autonomous Messages
Table 9-7
TL1 Commands and Messages Security Permissions (Access Levels) (continued)
User Access Levels
Command or Message
Description
R
RW
RWA
RTRV-TH-DWDM
Retrieves optical thresholds.
See the “9.6.39 RTRV-TH-DWDM”
section on page 9-63.
Yes
Yes
Yes
RTRV-TH-EQPT
Retrieves general thresholds.
See the “9.6.40 RTRV-TH-EQPT”
section on page 9-64.
Yes
Yes
Yes
RTRV-TOD
Retrieves date and time.
See the “9.6.41 RTRV-TOD” section
on page 9-66.
Yes
Yes
Yes
RTRV-USER-SECU
Retrieves access level of user(s).
Yes
Yes
Yes
See the “9.6.42 RTRV-USER-SECU” (own UID) (own UID) (all UIDs)
section on page 9-67.
SET-ATTR-DWDM
Sets alarm severity of optical alarms. No
See the “9.6.43 SET-ATTR-DWDM”
section on page 9-68.
Yes
Yes
SET-ATTR-EQPT
Sets alarm severity of general alarms. No
See the “9.6.44 SET-ATTR-EQPT”
section on page 9-69.
Yes
Yes
SET-ATTR-SECUDFL Sets timeout values for access levels. No
T
See the “9.6.45 SET-ATTR-SECUDFLT”
section on page 9-71.
No
Yes
SET-TH-DWDM
Sets optical thresholds.
See the “9.6.46 SET-TH-DWDM”
section on page 9-71.
No
Yes
Yes
SET-TH-EQPT
Sets general thresholds.
See the “9.6.47 SET-TH-EQPT”
section on page 9-72.
No
Yes
Yes
STA-LOCL-RST
Resets all parameters to
manufacturer’s default values.
See the “9.6.48 STA-LOCL-RST”
section on page 9-74.
No
No
Yes
9.6 TL1 Commands and Autonomous Messages
9.6.1 ACT-USER
Command Types
ACT-USER
Activates user session (login).
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
9-10
July 2004