Download Extron electronics Interface IPL T PC1i User guide

Transcript
IR control interface
IR control port�������������������������������� (1) 3.5 mm captive screw connector, 4 pole (shared with contact closure input
port)
Pin configuration���������������������������� 3 = S (IR signal output), 4 = GND
IR output carrier frequency������������� 30 kHz to 1 MHz
General
Power input����������������������������������� Internal
100-240 VAC, 50-60 Hz
5 watts
IPL T PC1��������������������������������� 12 A (max.)
IPL T PC1i�������������������������������� 10 A (max.)
Temperature/humidity�������������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling������������������������������������������ Convection, no vents
Mounting
Rack mount����������������������������� Yes, with optional 1U rack shelf
Furniture mount���������������������� Yes, with optional under desk mounting kit
Enclosure type�������������������������������� Metal
Enclosure dimensions��������������������� 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight������������������������������� 1.0 lbs (0.5 kg)
Shipping weight����������������������������� 3 lbs (2 kg)
Vibration���������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety
IPL T PC1��������������������������� CE, c-UL, UL
IPL T PC1i��������������������������� CE
EMI/EMC��������������������������������� CE, C-tick, FCC Class A, ICES, VCCI
MTBF��������������������������������������������� 30,000 hours
Warranty���������������������������������������� 3 years parts and labor
NOTES:• All nominal levels are at ±10%.
• Specifications are subject to change without notice.
IPL T PC1 • SIS Programming and Control
63