Download Multitech MultiModem Cell MTCBA-C1 User guide
Transcript
Chapter 12 – OTASP / OTAPA Commands Programming Unsuccessful +WOT3 Description: This Over-The-Air Service Provisioning (OTASP) response indicates that device programming has been completed unsuccessfully. This response will be accompanied by three quick audio tones from the speaker. Syntax: Response Syntax: +WOT3: “Programming Unsuccessful” Possible Responses +WOT3: “Programming Unsuccessful” Commit Successful +WOTC Description: This Over-The-Air Service Provisioning (OTASP) response indicates that the programmed parameters have been successfully committed to NV memory. Syntax: Response Syntax: +WOTC: “Commit Successful” Possible Responses +WOTC: “Commit Successful” SPL Unlocked +WOTS Description: This Over-The-Air Service Provisioning (OTASP) response indicates that the Software Provisioning Lock is in the unlocked state. Syntax: Response Syntax: +WOTS: “SPL unlocked” Possible Responses +WOTS: “SPL unlocked” NAM Download OK +WOTN Description: This Over-The-Air Service Provisioning (OTASP) response indicates that the NAM download has been completed successfully. Syntax: Response Syntax: +WOTN: “NAM Download OK” Possible Responses +WOTN: “NAM Download OK” MDM Download OK +WOTM Description: This Over-The-Air Service Provisioning (OTASP) response indicates that the MDM download has been completed successfully. Syntax: Response Syntax: +WOTM: “MDM Download OK” Possible Responses +WOTM: “MDM Download OK” Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 62