Download UPRIGHT FREEZER

Transcript
Bottom
basket.. .
Chanlging
To remove:
l Lift up, then pull o
To replace:
0 Insert into rear sli
0 Lower into place.
l
Push basket into freezer.
light bulb.. .
1. Unpl .Jg power cord.
2. Rem:)ve light shield by pulling away from the
side wall.
3. Replxe
bulb with 40 watt appliance
bulb.
4. To replace
shield, insert tabs into slots in wall
and press.
5. Plug gower cord into outlet.
Cleaning your freezer
This freezer should be cleaned
when frost has
built up to about l/4 inch (6 mm) thickness. Complete defrosting and cleaning
should be done at
least once a year. In high humidity areas, a freezer
may need more frequent defrosting.
To
I.
2.
3.
defrost and clean:
Turn Cold Control to OFF.
Unplug power cord.
Take out all food and removable
parts.
Note: Wrap frozen foods and packages
in several layers of newspaper
and cover with a blanket. Food will stay frozen several hours.
4. Place pans of hot water inside freezer to speed
melting of frost. Keep door open. Ice can be
removed
in large pieces as it melts.
Direct air from electric fan into freezerto speed
defrosting.
5. Remove base grille, see page 7.
6. Unclip hose and allow
hose into a flat pan.
Removing
water to drain through
7. Clecln freezer
according
direl::tions.
After du+frosting:
1. Hool drain hose in place.
2. Repl :rce base grille.
3. Plug In power cord.
4. See :lirections
for “Setting
pagci: 5.
to the
following
the Cold
Control,”
the base grille...
support Tabs
To repkrce:
2. Pull grille outwards
a\s shown.
3. Do not remove Tech sheet fastened
behlnd
grrlle
1 Line u :I grille support tabs with metal
2 Push f ,mly to snap Into place
3. Close the door
clips
7