Download McQuay PDAA Specifications
Transcript
Introduction Daikin McQuay offers the most complete line of PTAC products for new construction projects and exact replacements for our original Singer, Remington, American Air Filter and American Standard brand equipment, and models from other manufacturers. Daikin McQuay products feature our proven institutional grade design and construction that allows you to benefit from the long life, reliability, and low sound levels, along with higher energy efficiencies for lower operating costs. Plus, Daikin McQuay offers a nationwide network for original equipment replacements with local parts and service. Daikin McQuay® Applied Packaged Terminal Air Conditioners are designed and built for through-the-wall installation in either new or existing buildings. The self-contained refrigerant system delivers cooling to the desired space. Heating can be accomplished with electric resistance, with hydronic (water or steam), hydronic with intermediate electric resistance. Generally, an estimate for capacity selection is 35 BTUH per square foot of floor space (cooling) and 4 BTUH (1.25 watts) per cubic foot (heating). The architect or engineer must verify the selection. The unit will restart at its last setting after a power interruption. Figure 1: Model PDAA Unit with Touchpad Control (Shown with Subbase) Notes: 1. Unit pictured with subbase installed. Subbase is optional on 208V 230V units Subbase is required on all 265V and units with hydronic heat. See "Electric Subbase" on page 8 & "Hydronic Subbase" on page 9. Sides are adjustable. 2. Opening needs to be 16-5/8" (422mm) x 42-5/8" (1083mm) when using a louver frame. See "Figure 14: Louver Frame Dimensions" on page 13. Figure 2: Exploded View of the Applied PTAC Unit IM 934-5 Page 5 of 48