Download Bryce 30K Specifications

Troubleshooting Your Printer
Print Quality
Problems
(continued)
Problem
Skewed Print
Reason:
Sliding fence set incorrectly.
Solution:
Fence should control media without restricting feed.
Reason:
Roller or wiper is running along the edge of
the media.
Solution:
Move the print head bank to a slightly different position over the media.
Problem
Unwanted Bolding
Reason:
Escape sequence turning on bold or bold
selection in printer's menu options is set to
bold.
Solution:
Turn off bolding in software and/or turn bold
selection in printer menu OFF. See Appendix A for instructions. If problem still exists,
call Pitney Bowes for service.
Problem
Addresses "Walking"
Reason:
Incorrect Address Setup.
Solution:
Count carriage returns and line feeds and
adjust Lines Per Address to the same number.
Reason:
Address Termination should be Form Feed.
Solution:
Set Address Setup for 8 lines.
Check Line Termination: Typical:
CR=CR; LF=LF. Other choices,
(CR=CR+LF;LF=LF), (CR=CR;LF=CR+LF),
(CR=CR+LF;LF=CR+LF)