Download Epson EH-TW9100 User`s guide
Transcript
Preparing Installing Various Projection Methods Warning • A special method of installation is required when suspending the projector from a ceiling (ceiling mount). If it is not installed correctly, it could fall causing an accident and injury. • If you use adhesives, lubricants, or oil on the ceiling mount fixing points to prevent screws from loosening, or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall from its ceiling mount. This could cause serious injury to anyone under the projector and also damage the projector. • Do not setup the projector on its side. This may cause malfunctions to occur. • Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke from fires or tobacco smoke. Attention Clean the air filter once every three months. Clean it more often if the environment is particularly dusty. s p.93 Placing on a table and so on and projecting Suspending from the ceiling and projecting c When projecting from a ceiling, change Projection to a ceiling setting. s Settings Projection p.73 Using lens shift With lens shift, you can adjust the projection position up, down, left, and right. This allows you to make easy adjustments without distorting the image, even if you cannot setup the projector directly in front of the screen. 17