Download Sharp LC-65D93U Operating instructions

Useful adjustment settings
For automatically adjusting the PC image.
Press MENU to display the MENU screen,
and then press ...... /~ to select "Setup".
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
Press MENU to display the MENU screen,
and then press ...... /~ to select "Setup".
Press ./T to select "Auto Sync.", and then
press ENTER.
Press ./T to select "Fine Sync.", and then
press ENTER.
Press ...... /~ to select "Yes", and then press
ENTER.
Press ./T to select the specific adjustment
item.
• Auto Sync. starts and "Now adjusting the
image." displays.
•
Press MENU to exit.
• When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if "Completed" displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the 1V and switch it on
before starting Auto Sync.
• It is not necessary to use "Auto Sync." when digital signal
is being input, so it cannot be selected.
H-Pos.
Centers the image by moving it to the
left or right.
V-Pas.
Centers the image by moving it up or
down.
Clock
Adjust when the image flickers with
vertical stripes.
Phase
Adjust when characters have low
contrast or when the image flickers.
Press ...... /~ to adjust the item to your desired
position.
Press MENU to exit.
• For resetting all Fine Sync. adjustment items to the factory
preset values, press ./T to select "Reset", and then
press ENTER.
• It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
@-33