Download Mitel 5055 User guide
Transcript
5055 SIP Phone User Guide (Rev. A) Setting Name Values (bold = default) Notes Advanced Tone Code CA US GB DE NL AU NZ MX FR TFTP Configuration Yes | No ToS value 0 - 1e (even numbers only) 802.1 Priority Off | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 VLAN ID <0–4095> PPPoE On | Off PPPoE Login PPPoE Password <user/login name> <password> Changes the phone tone plan. Canada USA Great Britain Germany Netherlands Australia New Zealand Mexico France If set to yes, the SIP Phone looks for configuration files on the TFTP server when it boots up. The settings in the configuration files will overwrite any manually entered settings. Default is 192.168.0.1. Type of Service. QOS parameter used to define packet priority for the IP layer. You can select values from the pull-down menu in hexadecimal notation. QOS parameter used to define packet priority for Ethernet layer. Virtual LAN Id. Used by network administrators. Default is 1. Point-to-Point Protocol over Ethernet. Enabled when using a DSL network. Required for DSL. Provided by DSL ISP. Required for DSL. Provided by DSL ISP. Time Zones The table below is provided for your convenience. Mitel Network does not guarantee its accuracy. For Daylight Savings Time, add +1 (for example, if your standard time is –5, your daylight savings time is –4). Table 13 Major Time Zones Time Zone Diff. from GMT Fiji, New Zealand, Marshall Islands (US) Samoa, Midway Islands Cook Island, Hawaiian Standard Time (US) Alaska Standard Time (US) Pacific Standard Time (US/Canada) Mountain Standard Time (US/Canada) Central Standard Time (US/Canada), Mexico, Central America Eastern Standard Time (US/Canada), Caribbean, Colombia, Ecuador, Peru Atlantic Standard Time (US/Canada), Dominican Republic, Bolivia, Paraguay, Chile, Venezuela Newfoundland (Canada) - 58 - ±12 -11 -10 -9 -8 -7 -6 -5 -4 -3.5