Download Cisco Engine 611 Specifications
Transcript
Chapter 1 Using the WAAS Command-Line Interface WAAS Directories on a WAE Table 1-4 describes the directories that contain information that is useful for troubleshooting or monitoring. Table 1-4 Note WAAS Directory Descriptions Directory/File Name Contents actona This directory contains the current software image installed on the WAAS device and any previous images that were installed. logs This directory contains application-specific logs used in troubleshooting. The actona subdirectory contains the commonly used Manager.log, Utilities.log, and Watchdog.log log files. See the Cisco Wide Area Application Services Configuration Guide for more details about how these log files are used. syslog.txt This file is the central repository for log messages. Important messages about the operation of WAAS or its components are sometimes logged in this file. They are often intermingled with routine messages that require no action. You may be requested to provide this file, the output of the show tech-support EXEC command, and perhaps other output to Cisco TAC personnel if a problem arises. The WAAS software uses the CONTENT file system for both the Wide Area File Services (WAFS) file system and the data redundancy elimination (DRE) cache. Cisco Wide Area Application Services Command Reference 1-14 OL-16451-01
Related documents
Cisco Engine 611 Specifications
Cisco WAE-7326-K9 Specifications
Cisco WAE-674-K9 - Wide Area Application Engine 674 Specifications
Asus M3N-HD Specifications
Asus M3N72-D - Motherboard - ATX Specifications
Soyo P4I845PE (022769902777) Barebone
Panasonic CZ-256ESMC1U Installation Manual
Cisco Systems 611 User's Manual
Network Integration and Interception
Cisco Systems 7326 User's Manual
Cisco Systems 6901 IP Phone User Manual
Cisco Wide Area Virtualization Engine 274 Troubleshooting guide