Download Wolf Sub-Zero 648PROG Installation guide

PRO 48 Installation
15
subzero.com/specs
Complete the Installation
Optional Accessories
INSTALL KICKPLATE
90° DOOR STOP
Make sure the drain pan is in the proper position before
installing the kickplate. To install, screw the kickplate to
brackets attached to the inside surface of each roller
base. Refer to the illustration below.
The doors of PRO 48 models open to 135°. For installations where the door opening must be limited, an optional
90° door stop kit is available through your authorized
Sub-Zero dealer. To obtain local dealer information, visit
the find a showroom section of our website, subzero.com.
IMPORTANT NOTE: The kickplate must be removable for
service. The floor cannot interfere with removal.
Reinstall the grille by reversing the procedure outlined on
page 10. Turn power back on to the electrical outlet.
KICKPLATE
Kickplate installation.
SIDE AND TOP PANELS
For freestanding applications, stainless steel side and top
panels are available through your authorized Sub-Zero
dealer. Installation instructions are provided with the
panels. To obtain local dealer information, visit the find a
showroom section of our website, subzero.com.