Download Volvo Penta TAMD60A Technical data

Design and function
Coolant pump TAMD61,
-62, -71, -72
The coolant pump is mounted on the timing drive
cover and is driven by a gear wheel from the timing
drive system.
The pump has three seals. Two coolant seals and an
oil seal.
The pump rotates on a double row ball bearing.
Coolant pump TAMD63
The coolant pump is mounted on the front of the
engine block and is driven by a belt from the
crankshaft.
The pump rotates on two single row ball bearings (1)
and has a seal (2) which effectively prevents the
coolant from seeping out.
Sea water pump
The sea water pump is mounted on the timing drive
cover and is driven by a gear wheel from the timing
drive system.
The pump impeller (1) is made of rubber and is
replaceable.
The pump has three seals. Two sea water seals (2)
and an oil seal (3). The pump shaft rotates on one or
two ball bearings (4).
Note: The pump impeller can be damaged if the pump
is run dry.
21