Download MSI MS-6551 Instruction manual

Chapter 3
Hot Key Power ON
If POWER ON Function is set to Hot KEY, you can assign a hot key combina2
Power Again
This setting specifies whether your system will reboot after a power failure or
interrupts occurs. Available settings are:
Power Off
Leaves the computer in the power off state.
Power On
Reboots the computer.
Last State
Restores the system to the status before power failure or
interrupt occurs.
Reload Global Timer Events: Primary/Secondary Master/Slave IDE, FDC/
LPT/COM Ports
Global Timer Events are I/O events whose occurrence can prevent the system
from entering a power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything which occurs to a device
that is configured as Enabled, even when the system is in a power down mode.
3-20