Download DCS PHFS-DW User guide

Developers guidelines | AT commands
Response:
List of Internet accounts with their LCP parameters:
*EIALCPR: <index>,<bearer_type>,<accm>,<mru>,<pfc>,<acfc>,
<keep_alive>,<allowed_ncp>[:]
Test command:
AT*EIALCPR=? Test if command is supported and show supported
parameters
Test command
response:
Range of LCP parameters:
*EIALCPR: (0-255),(0-4)
Parameter:
<index>:
<index>
Description
0
Read LCP parameters of all <bearer_type> Internet
Accounts. Default value
1–255
Read LCP parameters of <bearer_type> Internet
Account with index as specified.
For range and more details on <index>, see command AT*EIAC
<bearer_type>
Description
0
All bearers. Used together with Index=0, reading all
Internet Accounts of all bearer types
1–4
Specific bearer. For more information on bearer
types see <bearer_type> parameter definitions
under command AT*EIAC
<accm>
Description
0–FFFFFFFF
Asynchronous Control Character Map value, as a
hexadecimal value. Default value: 0
<mru>
Description
1–1500
Max Receive Unit. Default: 1500
The specified value is the recommended, but any
MRU between this value and 1500 will be accepted
<pfc>
Description
0
00
Protocol Field Compression negotiation might not
be suggested.
Protocol Field Compression negotiation might not
be accepted
<bearer_type>:
<accm>:
<mru>:
<pfc>:
261
June 2010