Download INTRODUCTION 0

GENERAL TECHNICAL INFORMATION
•
3 - Using the feeler gauge, check again that valve
clearance is within the indicated values and possibly
repeat all steps relevant to valve clearance adjustment
until obtaining the prescribed clearance.
NOTE Lubricate the valve shims, see (LUBRICANT TABLE).
•
Using the suitable special tool (no. 8140850), tighten
the flywheel cover giving access to the timing
reference mark (3) and the flywheel cover giving
access to the crankshaft (4).
•
Install camshaft gearwheel cover (2) in its seat and
secure it with two washers and tighten the two screws
(1).
•
Install the exhaust tappet cover and tighten the four
screws.
2 - 50
PEGASO 650