Download Dell VA-40FC Technical data

10. To support Frame Redirection to an edge M-EOS fabric, there must be at least one FOS switch in the
edge fabric to configure Frame Redirection Zones.
11. Only Frame Redirection Zones may be configured on FOS platforms and sent to fabrics operating in
McDATA Open Fabric Mode (interopmode 3). M-EOS 9.9 is required to support FR Zones in McDATA Open
Fabric Mode.
Note: FICON Cascaded CUP with M-EOS and FOS qualified only on select platforms.
SAS Version Requirements for FA4-18 and Brocade 7600
Note: The SAS firmware version compatible with FOS v6.4.1 will be announced at a future date.
Scalability
All scalability limits are subject to change. Limits may be increased once further testing has been completed,
even after the release of Fabric OS. For current scalability limits for Fabric OS, refer to the Brocade Scalability
Guidelines document, available under the Technology and Architecture Resources section at
http://www.brocade.com/compatibility
Fabric OS v6.4.1 Release Notes v1.0
Page 21 of 62