1
Download Sharp R-22AMM Technical data
Transcript
STABILIZERS 1. GENERAL The horizontal stabilizer and vertical stabilizers are fully cantilever, semimonocoque design consisting of spars, ribs, and skin. The skin is bonded to the supporting structure. The horizontal stabilizer is a single composite structure from tip to tip. The two-piece elevator, attached to the horizontal stabilizer, is aluminum. The vertical stabilizer is composite structure integral to the main fuselage shell for smooth transfer of flight loads. The rudder is aluminum and is attached to the vertical stabilizer rear shear web at three hinge points. The empennage consists of a horizontal stabilizer, a two-piece elevator, a vertical fin and a rudder. All of the empennage components are conventional spar (shear web), rib, and skin construction. 13773-001 30 Nov 2000 55-00 Page 1
