Download Coma FW-C2800 Specifications
Transcript
Note The Setup utility is based on DOS. If you are using another operating system, you need to boot your system from a DOSbased diskette and complete the Setup. Then, reboot the system to the operating system of your choice. Accessing the Setup/Diagnostic Utility To access the Setup/Diagnostics utility: 1. Insert the Digital EtherWORKS 3 Turbo distribution diskette into the disk drive. 2. Set the system to the disk drive being used. 3. Type NICSETUP at the DOS prompt. An introductory window appears. Follow the instructions on each succeeding screen to set up the Turbo board. Setup Conventions The Turbo Setup/Diagnostic utility uses the conventions listed in Table 3–1. Table 3–1 Setup/Diagnostic Conventions If you want to . . . Select an option or menu Return to the previous window Move from one selection to another Then . . . Highlight the option or menu and press Enter. Press Esc. Use the arrow keys. Help on any option or menu item is always available while using the Setup utility. 3–2