Download Agilent Technologies EXG User manual

Notice
WARNING
The printer and its accessories (e.g. the infrared to parallel converter) may
not meet the leakage current requirements specified in IEC 60601-1 safety
standards. According to IEC 60601-1-1 safety standard, do not place the
printer and its accessories within 1.5 m (4.5 ft.) of the patient.
WARNING
If you use the cardiograph during defibrillation, please check the electrode
instructions first. The cardiograph recovery time after defibrillation
specified in IEC 60601-2-25 is affected by the type of electrodes used. Use
of conductive gels with the electrodes improves ECG recovery times after
defibrillation.
The ECG recovery time for defibrillation does not meet the requirements of
IEC 60601-2-25 when using reusable electrodes. You can achieve the ECG
recovery time required by IEC 60601-2-25 with some disposable electrodes
by setting the cardiograph to 0.5Hz Baseline Wander filter setting.
WARNING
The AC/DC adapter supplied with this cardiograph is an integral part of the
cardiograph’s safety features. Using any other AC/DC adapter may
compromise the cardiograph’s safety as well as performance.
CAUTION
[US] Federal law restricts this device to sale by or on the order of a physician.
WARNING
Use of accessories other than those recommended by Agilent Technologies
may compromise product performance.
WARNING
If non-Agilent recommended data transmission cable is used, the cardiograph may not meet the Radiated Emission Standard found in CISPR 11.
viii
Revision 0.1