Transcript
Quick Start Guide Please read these instructions Congradulations! You have a state-of-the-art flat widescreen digital LED Backlight TV (ML2241/ ML2441/ML2442)/ LCD TV(MK2443) which should provide you the years of viewing pleasure. Please take a few minutes to read these quick start instructions through before installing and using the TV. About Quick Start Quide This Quick Start Guide will provide you the introduction of various names and functions, and the relative information of installation of your TV. English About User Manual This LED Backlight TV (ML2241/ML2441/ML2442)/ LCD TV (MK2443) also includes the User Manual. It details the features and functions of the TV, and provides product specifications and troubleshooting information for your further assistance. The User Manual also describes how to customize the TV settings so that you can gain the best viewing experience possible to suit your preference and viewing environment. Check Package Contents Unpack the TV and check that all the following items are included: TV x 1 Remote Control x 1 AAA Batteries x 2 Power Cord x 1 M24k Series M22L/M24L Series Service Information x1 User Guide x 1 Quick Start Guide x 1 Base x 1 The type of power cable supplied may differ from that illustrated, dependant upon your region of purchase. Please contact your place of purchase immediately if any question and keep the product documents in a safe place for reference. Please dispose the packaging wisely: The chardboard carton can be recycled. Do not leave plastic bags within reach of young children or babies. If possible, please properly store all packaging materials to facilitate the delivery of this TV in the future. Check that you have not left an accessory inside the packaging before discarding. For the primary safety, this TV should be handled with care to avoid damage to it or to persons which come into contact with it. All LCD screens have a very thin protective layer of glass which is liable to marking or scratching, and cracking if struck or pressured. The liquid crystal substrate is also liable to damage under excessive force or extreme temperatures. Please handle with care. If you are installing using wall mount, please be noted that screw holes can withstsand the maximum torque of 20kgf-cm. 1 Installing the Base M24K Series Know your LCD TV Front View of LCD TV/LED Backlight TV Cover an even stable surface with a soft dry cloth. Then place the LCD TV unit facing up on the cloth, and align the bottom of LCD TV unit with the edge of the surface like shown on the right. Please open the box and make sure all necessary parts. The package contains a LCD TV unit and a base. M24K Series Power Indicator When the display is powered on, the indicator will light up blue. When the display is in standby mode, the indicator will light up orange. English English P/N: 4J.V0P03.001/4J.V0H08.001 After the installation is completed, please erect the LCD TV unit and carefully check whether it is properly installed. Then place the LCD TV unit on the intended location. Push the base into the LCD TV’s stand socket. M22L/M24L Series Speakers MENU Button Built-in Speakers, Experience High Quality Sound Effect. Cover an even stable surface with a soft dry cloth. Then place the LED Backlight TV unit facing down on the cloth, and align the bottom of LED Backlight TV unit with the edge of the surface like shown on the right. Please open the box and make sure all necessary parts. The package contains a LED Backlight TV unit and a base. VOL +/- Button (Power/Standby) Button CH up▲ / down▼ Button INPUT Select Button M22L/M24L Series Remote Control Receiver Receive signal from Remote Control. Please do not obstruct the sensor by placing any objects in front of it. After the installation is completed, please erect the LED Backlight TV unit and carefully check whether it is properly installed. Then place the LED Backlight TV unit on the intended location. Push the base into the LED Backlight TV’s stand socket. 2 3 Know your LCD TV Know your LCD TV Rear View of M22L/M24L Series LED Backlight TV English English Rear View of M24K LCD TV 1 2 4 3 5 6 7 8 9 10 11 12 13 2 1 4 3 5 6 7 8 11 1 AC Power Switch Use this switch to turn the main power on/off. 1 AC Power Switch Use this switch to turn the main power on/off. 2 AC Power Input Connect to a AC power source. 2 AC Power Input Connect to a AC power source. 12 13 3 USB Connect to your USB device such as USB Flash Drive. 3 RS232 Input This port is for the service technician’s use. 4 HDMI 1 / 2 Connect to the HDMI output terminal of the external equipment. 4 HDMI 1/2/3 Connect to the HDMI output terminal of the external equipment. 14 5 PC Input Connect to the VGA output of your PC. 5 PC / DVI Audio Input Connect to your PC’s DVI or VGA corresponding audio output terminal. 6 S-Video Input Connect to the S-Video output terminal of the video device. 6 PC Input Connect to the VGA output of your PC. 7 YPbPr Input Connect to the Component (YPbPr) video output terminal of the device. 7 YbPbPr Input Connect to the Component (YPbPr) video output terminal of the device. 8 AV Input Connect to the Composite (AV) video output terminal of the device. 8 S-Video Input Connect to the S-Video output terminal of the video device. 9 Audio Input Connect oto the left/right audio channel output of the external device. 9 AV Input Connect to the Composite (AV) video output terminal of the device. 10 PC / DVI Audio Input Connect to your PC’s DVI or VGA corresponding audio output terminal. 10 Audio Input Connect oto the left/right audio channel output of the external device. 11 Earphone Connect the stereo headset plug(3.5mm mini-jack) to the stereo headset output socket on the display. 11 Earphone Connect the stereo headset plug(3.5mm mini-jack) to the stereo headset output socket on the display. 12 SCART Input Connect to the SCART of the external device. 12 SPDIF Audio Output Connect SPDIF optical cable from A/V device. 13 SPDIF Audio Output Connect SPDIF optical cable from A/V device. 13 USB Input Connect to your USB device such as USB Flash Drive. 14 SCART Input Connect to the SCART of the external device. 4 5 Know your LCD TV M24K Series Connected External Audio/Video Device The following table lists a variety of different terminals to connect an external audio/ video device, provided by the difference in picture quality as a reference. Recommendation: Please choose the high picture quality connection if your audio/video device is supported for better effect and experience. Left Side View Names CAM Card Slot HDMI English RF Antenna / Cable TV Input RS-232 Input This port is for the service technician’s use. Connect to RF cable or CATV cable. Terminal Appearance / Color 、 Page Number on User Manual OR 27 SCART 27 S-Video 28 Composite AV 26 OR PC D-Sub Right Side View Better Picture Quality Good Picture Quality Plug the CAM Card into this slot. MENU Button RF Antenna / Cable TV Input CH up▲ / down▼ Button Connect to RF cable or CATV cable. INPUT Select Button (Power/Standby) Button 6 PC Average Picture Quality Not Recommended For safety reasons, please do not connect the power of this LED Backlight TV (ML2241/ML2441/ML2442)/ LCD TV (MK2443) before connecting to any external audio/video device(s). Please make sure the power of the external device is also switched off. VOL +/- Button CAM Card Slot VHS Video Player 29 Notice while connected Left Side View Game Console 28 Best Picture Quality M22L/M24L Series DVD Player 29 Component Y Pb Pr 、 Connected Equipment Blu-Ray Player English Plug the CAM Card into this slot. DVI English 10 9 7