Download SimMechanics User`s Guide

Transcript
mech_pdf.book Page 3 Tuesday, February 1, 2005 1:57 PM
Index
E
I
equivalent ellipsoids 6-5
errors
See also simulation, fixing errors
Euler angles 3-11
Euler’s equations 8-4
exporting CAD assemblies
See also computer-aided design
See also XML
importing CAD assemblies
See also computer-aided design
See also XML
import_physmod command 10-2
inertia tensor
defined 8-4
introduced 4-10
time-varying 4-45
initial conditions
setting 4-54
In-Plane block 9-94
internal forces
represented by force elements 4-59
via sensor-actuator feedback 4-62
Inverse Dynamics mode
finding forces from motion 8-6
overview 1-20
setting up motion actuation 8-6
simulating in 8-11
F
follower body 4-21
Force Elements block library 2-5
Forward Dynamics mode
overview 1-20
friction
pure kinetic friction 4-44
See also stiction
G
Gear Constraint block 9-82
Gimbal block 9-86
gravity
as external signal 5-3
setting in a machine 5-3
Ground block 9-91
grounds
connecting to Machine Environment 4-8
ground point 4-8
grounded coordinate system 4-9
modeling 4-8
J
Joint Actuator block 9-99
Joint Initial Condition Actuator block 9-104
Joint Sensor block 9-108
Joint Spring & Damper block 9-115
Joint Stiction Actuator block 9-119
joints
actuating 4-48
assembly restrictions 4-23
automatic assembly of disassembled 4-31
cutting, automatic 4-33
cutting, manual 4-33
directionality 4-21
disassembled joints 4-30
joint primitives 4-18
Index-3