Download CDR-HD1000
Transcript
OTHERS ■ To change the display brightness (Dimmer Setup) You can change the brightness of the display. 1. Press MENU to display the menu item selection while this unit is in the stop mode. 2. Select “Sys. Utility” by rotating the MULTI JOG knob (pressing +/– on the remote control). 3. Press the MULTI JOG knob (ENTER on the remote control) to display the system utility item selection. 4. Select “Dimmer Setup” by rotating the MULTI JOG knob (pressing +/– on the remote control). ■ To set auto play (Auto Play) You can set the auto play function which automatically starts playback when the power of this unit is turned on. 1. Press MENU to display the menu item selection while this unit is in the stop mode. 2. Select “Sys. Utility” by rotating the MULTI JOG knob (pressing +/– on the remote control). 3. Press the MULTI JOG knob (ENTER on the remote control) to display the system utility item selection. 4. Select “Auto Play” by rotating the MULTI JOG knob (pressing +/– on the remote control). Dimmer Setup L dB –30 –10 –6 –2 0 R Auto Play L dB –30 –10 –6 –2 0 R 5. The current setting is indicated on the display if the MULTI JOG knob (ENTER on the remote control) is pressed. 5. The current setting is indicated on the display if the MULTI JOG knob (ENTER on the remote control) is pressed. Dimmer Bright L dB –30 –10 –6 –2 0 R Auto Play Off L dB –30 –10 –6 –2 0 R (Initial setting) The selection and the brightness change in 3 levels as the MULTI JOG knob is rotated (+/– on the remote control is pressed). Dimmer Bright L dB –30 –10 –6 –2 0 –6 –2 0 –2 0 R Dimmer Mid L dB –30 –10 R Dimmer Dark L dB –30 –10 –6 (Initial setting) Select “Auto Play On” by rotating the MULTI JOG knob (pressing +/– on the remote control). 6. Press the MULTI JOG knob (ENTER on the remote control) or COMPLETE. The auto play function will be turned on and applied when the power of this unit is turned on the next time. • This unit plays data on the drive that had been last selected when the power of this unit was last turned off. • This unit plays in the playback mode (such as random play) that had been last set when the power of this unit was last turned off. Note • Initial setting is “Auto Play Off”. R 6. Press the MULTI JOG knob (ENTER on the remote control) or COMPLETE. The display brightness has been set. ■ To update the firmware version (Firm. Update) This menu is prepared for the expansion of the functions in the future. ADDITIONAL INFORMATION English E-61