Download Agilent Technologies 86100A Technical data
Transcript
Sample Programs
Listings of the Sample Programs
change_setup ( );
get_learnstring ( );
close_IO ( );
/* request user to change setup */
/* restore learnstring */
/* close device and interface sessions */
/* Note: routine found in sicl_IO.c or natl_IO.c */
} /* end main */
/*
* Function name: initialize
* Parameters: none
* Return value: none
* Description: This routine initializes the analyzer for proper acquisition of data.
* The instrument is reset to a known state and the interface is cleared.
* System headers are turned off to allow faster throughput and immediate access to the data values requested by queries.
* Autoscale is performed to acquire a waveform. The signal is then
* digitized, and the channel display is turned on following the acquisition.
*/
void initialize ( )
{
write_IO ("*RST");
write_IO ("*CLS");
/* reset scope - initialize to known state */
/* clear status registers and output queue */
write_IO (":SYSTem:HEADer ON");/* turn on system headers */
/* initialize Timebase parameters to center reference, 2 ms full-scale (200 us/div), and 20 us delay */
write_IO (":TIMebase:REFerence CENTer;RANGe 5e-3;POSition 20e-6");
/* initialize Channel1 1.6v full-scale (200 mv/div); offset -400mv */
write_IO (":CHANnel1:RANGe 1.6;OFFSet -400e-3");
/* initialize trigger info: channel1 signal on positive slope at 300mv */
write_IO (":TRIGger:SOURce FPANel;SLOPe POSitive");
write_IO (":TRIGger:LEVel-0.40");
/* initialize acquisition subsystem */
/* Real time acquisition - no averaging; record length 4096 */
write_IO (":ACQuire:AVERage OFF;POINts 4096");
} /* end initialize ( ) */
/*
* Function name: store_learnstring
* Parameters: none
* Return value: none
* Description: This routine requests the system setup known as a learnstring.
* The learnstring is read from the scope and stored in a file called Learn2.
*/
void store_learnstring ( )
{
FILE *fp;
unsigned char setup[MAX_LRNSTR] ={0};
int actualcnt = 0;
2-27
Related documents
Agilent Technologies Sprinkler 54753a User's Manual
CoursEval Administrator User Guide
Texas Instruments TMS3320C5515 User's Manual
Agilent Technologies Ininiium 90000 Technical data
Agilent Technologies Ininiium 9000 Technical data
(Agilent) 83495A Optical/electrical clock recovery
Agilent Technologies 86100C Technical data
Agilent Technologies 86100C Specifications
R&S TS-PAM User Manual - rohde
USER MANUAL - Rohde & Schwarz