Download Drill Master 91396 Operating instructions

SPECIFICATIONS
Electrical Requirements
Drill Specifications
Flashlight Specifications
Battery Charger Input: 120VAC / 60Hz
Battery Output: 18 VDC
Battery Amp Rating: 1.2 Amp - hr
Battery Charging Time:
7 Hours Initial / 5 to 7 Hrs. Subsequent Charges
18 V / 550 RPM / 3/8” Keyless Chuck
Variable Speed / Reversible / 6 Torque Settings
Pistol Grip / Squeeze Trigger
18 V / 5 Watt Bulb
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
Work Area
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
REV 10b, 10e
SKU 91396
For technical questions, please call 1-800-444-3353.
Page 2