Download Alfa Romeo 33 Technical data

l
l
,;
1’
il
~
1 Fuel vapour intake tube
2 Vacuum pressure tube for dump valve
control
3 External air delivery tube
4 Fuel tank
5 Fuel vapour breather; hose
~6 Compensation valve
7 Fuel :iapour separator
8 Fuel ‘vapour recovery tube
9, Dum&+e ,
10 Fuel !vapour filter
~
IMPORTj’ihjT GENERAL DATA
,’
Never istart the engine when ‘the
battery latiles are not properly
connected.
TO star-t the engine, never use a
rapid baftery charger.
Never discdn,nect battery from vehicle’ electrbnic system when the
engine is started.
In no case use a rapid battery
3 charger.:
~
Octoper ‘91’
1,
,,
,’
When painting in furnace at temperature over 80 OC, remove the
electronic control unit.
Make sure that screened wire
connections are properly connected.
Never connect or disconnect electronic CU conductor plug when
ignition is switched on.
Never connect to ground high or
04-8
.
low voltage tables, for testing.
Should any accessories be mounted on vehicle, it is always advisable to disconnect electonic CU
and to check the functioning accessories with the CU disconnec~ ted. It isi very strongly advised never to connect any leads (other
than those of the CU itself),to the
wiring of the CU.
PA3279E0883301