Download Boulder 1008 Specifications

SYMPTOM
No power indication
on 1008
TROUBLESHOOTING
CAUSE
Power switch is not in ON position
Turn on power switch
Home circuit breaker is tripped
Reset circuit breaker
1008 is not plugged in
Low AC line voltage
Power supply fuse blown
Amber power indication on 1008, but no
sound is heard
Defective 1008
1008 is muted, MUTE indication is Amber
No signal from turntable
No signal out to preamplifier
Hum through loudspeakers
6-3
APPENDIX
REMEDY
1008 is faulty
Connect to an AC outlet
Have AC line checked
Replace fuse on rear panel
Return to dealer for service
Press MUTE pushbutton to turn
mute indicator OFF
Check turntable connections
Check connections to preamp
Return to dealer for service
No ground connection
Check or install ground wire
1008 or turntable is too close to another
components power supply
Move 1008 and/or turntable away
from power supply
Duplicate ground connection
Use only one ground wire to
turntable or use the ground in a
balanced cable