Download Brocade Communications Systems StorageWorks 2/16N - FF And 2/16N SAN Switch Specifications
Transcript
haShow haShow Displays control processor (CP) status. Synopsis haShow Availability Admin Release V4.1.x Description Use this command to display the control processor status, which includes: ■ Local CP state (slot number and CP id) ■ Remote CP state (slot number and CP id) ■ High Availability Enabled/Disabled ■ Heartbeat Up/Down ■ Health of Standby CP. The Health of Standby CP can show one of the following values: ■ Healthy The Standby CP is running and the background health diagnostic has not detected any errors. Failed The Standby CP is running, but the background health diagnostic has discovered a problem with the blade. The logs should be checked to determine the appropriate repair action. Fail-over will be disabled until the Standby CP can be repaired. HA Synchronization Status. The HA Synchronization Status field can show one of the following values: HA State Synchronized The system is currently fully synchronized. If a fail-over were necessary at this time, the fail-over would be non-disruptive. Fabric OS Version 3.1.x/4.1.x Reference Guide 349