Download DVR 8-CH Specifications
Transcript
WPS-100-DVR-8CH Installation and Users Manual 9.6 IPHONE REMOTE CONTROL The following section describes the steps to add the WPS-DVR application to an iPhone, iPod or iPad and how to operate the application. 1. INSTALL THE APPLICATION 1. Access the iTunes App Store using iTunes or your Apple Device and search for WPS-DVR. 2. Install and run WPS-DVR on your Apple Device. 2. ADD THE DVR IN THE DEVICE LIST 1. Select the Add button to add the DVR to the Device List. 2. Enter a name for the DVR in Device Name. 3. Enter the DVR’s IP address or DDNS name in Address. • If connecting on a local network, enter the IP address (Ex: 192.168.0.101). • If using DDNS, enter the registered domain name (such as smithdvr.dyndns.com). Note: Do not precede the address with “http://” or add a port number to the end of the address. 4. Enter the Control Port and Data Port numbers that match the settings of the DVR and the router that the DVR is connected to. By default, these numbers are 67 and 68 respectively. 5. Enter the User Name and Password for the DVR. By default, these settings are user and 1234 respectively. 6. If enabled, Auto Connect will establish a connection with the DVR as soon as the application is opened. 7. Select the OK button once settings are complete. Recommendation: Enter two devices per DVR to the Device List. One could be named “Local” and the second “Remote.” When the user is connected to the same local network as the DVR and selects “Local,” the user will experience faster network speed. When connected to a remote network, the user should select “Remote” to still have access to the DVR. 104 WPS-DVR