Download VOKERA Mynute Technical data
Transcript
INTRODUCTION The Vokera 12, 16, and 20e Mynutes are central heating boilers, which – by design – incorporate electronic ignition, circulating pump, expansion vessel, safety valve, pressure gauge, and automatic by-pass. They are produced as room sealed, category II2H3+ appliances, suitable for wall mounting applications only. They are provided with a fan powered flue outlet with an annular co-axial combustion air intake that can be rotated – horizontally – through 360 degrees for various horizontal or vertical applications. The Mynute range can also be used with the Vokera twin flue system. These appliances are designed for use with sealed systems only; consequently they are not intended for use on open vented systems. The provision of stored hot water is possible by the addition of an indirect cylinder. A range rating facility is incorporated in the appliance. 1 24 2 23 3 Fig.1 General Layout 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 22 5 6 21 7 20 8 19 18 17 9 16 15 13 12 Flue outlet Air intake Pressure differential switch Silicone tubes (pressure diff. switch) Heat exchanger NTC thermistor High limit thermostat Spark/sensing electrode Gas valve Clock aperture Pressure gauge Thermostat Mode switch Warning led Water pressure switch Safety valve Pump Automatic air vent Burner Expansion vessel Combustion chamber Fan Air chamber Flue gas analysis test point 11 10 14 Fig. 1 Mynute 1