Download OPC Toolbox User`s Guide

Transcript
1
Introduction
Client Machine Configuration
On the machine(s) that will be running MATLAB and OPC Toolbox software, perform the
following steps:
1
On the client machine(s), create the identical local user with the same name and
password permissions as you set up in step 1 of “OPC Server Machine Configuration”
on page 1-11.
2
Select Start > Control Panel. Double-click Administrative Tools and then
double-click Component Services. The Component Services dialog appears.
3
Browse to Component Services > Computers > My Computer. Right-click My
Computer and select Properties.
4
Click the Default Properties tab, and ensure that:
• Enable Distributed COM is checked
• Default Authentication Level is set to Connect
• Default Impersonation Level is set to Identify
1-14