Download HP dc72 - Blade Workstation Client User guide
Transcript
— Add to the [GuiRunOnce] section [GuiRunOnce] "%systemdrive%\HP_Install\Driver_Software_Install2.cmd" The above entry will run the install script "Driver_Software_Install.cmd" (see Appendices) that will install drivers and software at first login after install. — Add to the [WindowsFirewall] section [WindowsFirewall] Profiles = WindowsFirewall.TurnOffFirewall [WindowsFirewall.TurnOffFirewall] Mode = 0 In the above firewall example, the Windows® firewall is disabled see the Windows® documentation on firewall settings). In practice, HP does not recommend disabling the Windows® firewall unless another firewall is in use. See "Configuring the operating system (on page 20)" for recommended firewall settings. b. Windows® XP Pro x64 — Add to the [Unattended] section: Plug and Play driver location: OemPNPDriversPath="\\%SERVERNAME%\RemInst\%INSTALLPATH%\$OEM$\textm ode;Drivers\HP_NULL_IPMI;Drivers\HP_SmartArray_E200i_SAS;Drivers\In tel_chipset;Drivers\ " For both Windows® XP-32 and Windows® XP-64, the path for the NVIDIA driver is intentionally omitted. Because the workstation blade contains two video controllers, the workstation makes the NVIDIA driver primary during the install, and if Remote Console Mode is in Setup Mode, the screens go black. This change occurs because the iLO Remote Console and Local I/O Connector displays are controlled by the ATI controller, and are deactivated if NVIDIA is the primary controller. The NVIDIA driver is installed later in the installation process and activated before switching to User Mode. The ATI drivers that are downloadable from the workstation blade software and drivers web page are not Microsoft® signed. If you do not to use the unsigned drivers, the default VGA driver in the operating system is loaded. Remove the ATI lines in the driver path to prevent the ATI driver from loading. Other settings: OemPreinstall=Yes DisableVirtualOemDevices=Yes DriverSigningPolicy=Yes — Add to the [MassStorageDrivers] section: [MassStorageDrivers] "Windows Driver for Smart Array SAS/SATA Controllers"="OEM" — Add to the [OEMBootFiles] sections: [OEMBootFiles] txtsetup.oem hpcisss2.cat hpcisss2.sys hpcissx2.inf Performing an unattended installation of Windows® XP 35