Download USER``S MANUAL

Transcript
21. See step 7. Tighten the M8 x 16mm
Screws (72).
21
Then, press the Shield Cover (75) downward
onto the Left and Right Front Shields (73, 74).
75
73, 74
22. While a second person tips the elliptical to the
left and holds it, attach a Stabilizer Cap (134)
to the right side of the Frame (1) with two M4 x
16mm Screws (104).
22
Next, tighten a Leveling Foot (92) into the Frame
(1) in the indicated location.
Repeat this step on the left side of the
elliptical.
134
1
92
104
23. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.
15