Download Boss Audio Systems OL4KD User`s manual

Introduction
Features
With the
Outlaw Class D
amplifier series, we are introducing
three new CLASS D amplifiers, all
designed in the USA.
Your new Outlaw amplifier features the
following:
These Outlaw models feature variable
low pass and subsonic filters and a
variable input gain control. These
models also incorporate a phase
selector switch to help compensate
for time delays in subwoofer
applications.
• MOSFET PWM (Pulse Width
Modulated) Power Supply
For further flexibility in the use of a
subwoofer, a variable 0-+18dB Bass
Boost control has been included.You
can control the subwoofer level with
the remote level control module.
• Soft turn-on circuit
understands that amplifiers are
placed in many different kinds of
installations, so we have also included
an input sensitivity control to help you
integrate the amp into your system
regardless of the nature of your input
source.
• Input voltage sensitivity selector
A special feature on this Class D amp
is DataLink circuitry, which allows you
to “strap” (bridge) together two
identical Outlaw Class D amp models
for an astounding total maximum
output power of between 6,000 and
an astounding 10,000 watts,
depending on the model selected.
• Variable 0-+18dB Bass Boost
• Class D operation
• One Ohm stable mono operation
• Thermal, overload and speaker
short protection
• Remote turn-on/turn-off circuit
• Variable input gain control
• Variable subsonic filter: 15-40 Hz,
24dB/octave
• Variable low pass filter: 50-150 Hz,
24dB/octave
• 0/180º Phase Shift selector
• Nickel-plated RCA low level inputs
• Nickel-plated speaker and power
terminals
• LED power and protection
indicators
• Red anodized heatsink
• Remote subwoofer level control
OL5KD • OL4KD • OL3KD Amplifier User’s Manual - page 2