Download DeWalt DWMT70786L Instruction manual

English
WHAT CAN HAPPEN
• Using inflator nozzles for
• DO NOT use inflator nozzles
duster applications can cause
for duster applications.
serious injury.
WARNING: RISK OF INJURY
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Tools left unattended, or with • Remove air hose when tool
the air hose attached can be
is not in use and store tool
activated by unauthorized
in a secure location away
persons leading to their injury
from reach of children and/or
or injury to others.
untrained users.
• Air tools can propel loose
• Use only parts, and
objects or other materials
accessories recommended by
throughout the work area.
the manufacturer.
• Keep work area clean and free
of clutter. Keep children and
others away from work area
during operation of the tool.
• Keep work area well lit.
• Air tools can become • Remove air hose to lubricate,
activated by accident during
add, and remove drills or
maintenance or tool changes.
accessories, etc.,
to the tool.
• Never carry the tool
by the hose.
• Avoid unintentional starting.
Don’t carry hooked-up tool with
finger on trigger.
• Repair service should be done
only by an authorized service
representative.
• A wrench or a key that is left
attached to a rotating part of
the tool increases the risk of
personal injury.
HOW TO PREVENT IT
• Air tools can cause the work
piece to move upon contact
leading to injury.
• Use clamps or other devices
to prevent movement.
• Loss of control of the tool can • Never operate tool while
lead to injury to self or others
under the influence of
drugs or alcohol.
• Don’t overreach. Keep proper
footing and balance at all times.
• Keep handles dry, clean, and
free from oil and grease.
• Stay alert. Watch what you are
doing. Use common sense.
Do not operate tool when
you are tired.
• Poor quality, improper, or
• Always use tool attachments
damaged tools such as
rated for the speed of
grinding wheels, chisels,
the power tool.
sockets, drill, etc., can fly
• Never use tools which have
apart during operation,
been dropped, impacted or
propelling particles
damaged by use.
throughout the work area
• Do not apply excessive force
causing serious injury.
to the tool – let the tool
perform the work.
• Remove adjusting keys and
wrench before turning
the tool on.
6